Advertisement
Available languages
Available languages
6 electrolux
OptiHeat Control (3 step Residual heat indicator)
WARNING!
Risk of burns from residual heat!
\
\
OptiHeat Control indicates the level of the residual heat.
Operating instructions
On and O
Touch
for 1 second to start or stop the appliance.
Automatic Switch O
The function stops the hob automatically if:
all cooking zones are o .
you do not set the heat setting after you start the hob.
you cover a sensor eld with an object (a pan, a cloth, etc.) for longer than 10 seconds.
The sound operates until you remove the object.
the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again, the
cooking zone must be cool.
you do not stop a cooking zone or change the heat setting. After some time
on and the hob stops. See the table.
Automatic Switch O times
Heat setting
Stops after
The heat setting
Touch the control bar at the heat setting.
Change to the left or the right, if it is necessary.
Do not release before you have a correct heat
setting. The display shows the heat setting.
-
6 hours
5 hours
-
-
4 hours
comes
-
1.5 hours
Advertisement
