Output Mode For Machine With Inner Tray It-101 - Konica Minolta 7145 Instruction Manual

Output Mode for Machine with Inner Tray IT-101

This section describes the following four output
modes for a copier with the Inner Tray.
The Inner Tray IT-101 is equipped with two exit
trays. The output to Tray 1 in Stack mode is
initially selected.
1 Stack mode copies the original set in amounts determined by the print quantity
setting, then outputs sorted sets normally.
2 E-SORT+Sort mode rotates every other sorted sets by 90° upon exit, provided the
same paper size is loaded in two trays, one tray with paper loaded in portrait
orientation and the other tray with paper loaded in landscape orientation, e.g., A4
and A4R.
3 Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
4 E-SORT+Group mode rotates every other grouped set by 90° upon exit, provided
the same paper size is loaded in two trays, one tray with paper loaded in portrait
orientation and the other tray with paper loaded in landscape orientation, e.g., A4
and A4R.
Specification for Output Modes with Inner Tray
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Booklet, OHP
Interleave, Image Insert, Non-Image Area Erase, Repeat, AUTO Layout, Stamp
(Numbering)
❒ Incompatible with E-SORT+Sort mode: Mixed Original, Sheet/Cover Insertion,
Booklet, OHP Interleave, Non-Image Area Erase, Repeat, AUTO Layout
❒ Incompatible with E-SORT+Group mode: Using platen glass (unless Chapter with
Platen store mode, Image Shift, Flip Side 2, or Stamp (excluding Numbering) is
used), Proof Copy, Mixed Original, Sheet/Cover Insertion, Booklet, OHP Interleave,
Image Insert, Non-Image Area Erase, Repeat, AUTO Layout, Stamp (Numbering)
3-50