Konica Minolta 7145 Instruction Manual page 10

Copier
Hide thumbs Also See for 7145:
Table of Contents

Advertisement

Features of the 7145 (continued)
• Density Shift
Shifts each of nine density levels in four density modes to three levels lighter or two
levels darker (Text/Photo, Text, and Photo modes), and two levels lighter or three levels
darker (Increase Contrast mode).
• Dual Page
Copies both pages of an open book or A3/B4 size sheet separately onto two A4/B5 size
sheets in 1-1 mode or separately onto each side of one A4/B5 size sheet in 1-2 mode.
You can use the Dual Page mode with the Front or Front/Back cover mode. The cover
page(s) will be scanned and copied normally before image division is performed on the
other pages.
• Flip Side 2
1-2 Flip Side 2 arranges the even pages of the simplex originals upside down on the
reverse side of duplex copies.
Similarly, 2-1 Flip Side 2 rearranges the reverse side of duplex originals which reads
upside down to make normal simplex copies.
• Folded Original
This feature sets the RADF to accept folded originals.
• Frame/Fold Erasure
Erases border and/or fold image area using Frame (1 - 15 mm), Fold (1 - 30 mm), or
Frame & Fold.
• Image Insert
Stores pages in memory from the platen glass, and inserts the pages into a document
copied from the document feeder.
• Image Shift
Creates or removes a margin at the top, bottom, right and left edges (shift amount from
- 250 mm ~ + 250 mm, in 1 mm increments); and reduces image to prevent image loss
(reduce & shift amount from - 250 mm ~ + 250 mm, in 1 mm increments).
• Interrupt Copying
Interrupts job-in-progress to perform an urgent copy, using any of the copier features
for the interrupt job.
• Job List
Displays the Job List Screen to view the current machine status, changes the operation
order of reserve jobs, or deletes the unused reserve job.
• Job Memory
Programs up to 15 jobs and recalls each job by job number, as needed. All compatible
platen glass functions can be programmed into Job Memory directly after they are
selected.
• Lens Mode (Zoom)
Selects fixed ratios, three reduction, three enlargement, and three user-set ratios.
Zoom ratios can be selected from 25 % ~ 400 % in 1 % increments.
viii

Advertisement

Table of Contents
loading

Table of Contents