Memory Positions For Driver's Seat, Mirrors, Pedals, Radio And Climate Controls; Memory Settings For Your Vehicle; (Driver Information Center) - Chevrolet 2004 Avalanche Getting To Knowow

5. As you lower the Midgate with the
window stored, the entire crossbar
will lower with the Midgate. This is
normal. However, be prepared for the
extra weight of the crossbar.
Note: To return the Midgate to its
normal position, raise the Midgate up
with a firm, swinging motion to ensure it
closes with enough force to latch it
securely.
See Section 2 of your Owner Manual.
Memory Positions for Driver's
Seat, Mirrors, Pedals, Radio and
Climate Controls (if equipped)
Use the driver's door mounted
controls to:
• Adjust driver seat, including lumbar
adjustment
• Adjust gas and brake pedals
• Adjust the outside rearview mirrors
• Set the radio presets and climate
control temperature (the climate con-
trol temperature will revert to the last
temperature setting used)
• Press and hold Memory 1 or 2 until
two chimes sound (about four
seconds)
• To set up for another driver, repeat
the process with the other memory
button.
These settings will be remembered after
they are programmed by pressing the
Memory 1 or 2 button on the driver's
door (shown above). If you unlock the
vehicle with the Remote Keyless Entry
(RKE) transmitter, the vehicle memory
settings will correspond to the number
on the RKE transmitter: 1 or 2.
See Section 2 of your Owner Manual.
Memory Settings for Your
Vehicle (Driver Information
Center) (if equipped)
Your vehicle may be programmed with
the features shown below. To cycle
through them, use the
Personalization/Menu button (
located on your steering wheel.
• Alarm Warning Type
• Automatic Locking/Unlocking
• Perimeter Lighting
• Delayed Locking
• Remote Lock/Unlock Feedback
• Seat Position Recall
• Headlamps On at Exit
15
)