Content Theft-Deterrent System; Personalizing Your Vehicle; Memory Positions For Driver's Seat, Mirrors, Pedals, Radio And Climate Controls - Chevrolet Silverado 2004 Getting To Know Manual

Getting to Know Your Silverado
10

Content Theft-Deterrent System

(if equipped)
Arm the System
• Lock the doors using the power door
lock switch or the Keyless Entry
System transmitter. The alarm is acti-
vated when the symbol shown above
illuminates in the instrument cluster
(approximately 30 seconds).
If your vehicle is equipped with a Driver
Information Center, you can program the
alarm to the following:
• Both Horn/Headlamps
• Horn only
• Lamps only
• Off
Note: Your vehicle's factory default
setting is Horn and Lamps. See the
Personalizing Your Vehicle section of
this booklet for more information.
See Section 2 of your Owner Manual.
Memory Positions for Driver's
Seat, Mirrors, Pedals, Radio and
Climate Controls (if equipped)
Use the driver's
door mounted
controls to:
• Adjust driver
seat, including
lumbar
adjustment
• Adjust gas and
brake pedals
• Adjust the outside rearview mirrors
• Set the radio presets and climate
control temperature (the climate
control temperature setting will revert
to the last temperature setting used)
• Press and hold Memory 1 or 2 until
two chimes sound (about four
seconds)
• To set up for another driver, repeat
the process with the other memory
button
These settings will be remembered after
they are pro-
grammed by
pressing the
Memory 1 or 2
button on the
driver's door
(shown above).
If you unlock the
vehicle with the
Remote Keyless
Entry (RKE) transmitter, the vehicle
memory settings will correspond to the
number on the RKE transmitter: 1 or 2.
See Section 2 of your Owner Manual.