Tire Pressure Monitor; Memory Positions For Driver's Seat, Mirrors, Pedals, Radio And Climate Controls - Chevrolet Tahoe 2004 Getting To Know Manual

Getting to Know Your Tahoe/Suburban
12

Tire Pressure Monitor

(if equipped)
This feature alerts you when a
substantial reduction in pressure occurs
in one of your vehicle's tires. If this
occurs, a CHECK TIRE PRESSURE
message will appear in the instrument
panel cluster. This message will remain
on until you reset the system.
Reset the tire pressure monitor
• To reset the tire pressure message,
you must fill the tires with the correct
amount of air. The best time to check
your tire pressure is when the tires
are cold.
• Pressing the cluster stem button on
your instrument panel cluster or the
Reset button (
wheel (if equipped) will temporarily
eliminate the message. However, at
the next vehicle start-up, the mes-
sage will reappear. The tire pressure
must be corrected to permanently
eliminate the message.
Note: The Tire Pressure Monitor
can alert you about low tire pressure,
but it doesn't replace normal tire
maintenance.
See Section 5 of your Owner Manual.
) on your steering
Memory Positions for Driver's
Seat, Mirrors, Pedals, Radio and
Climate Controls (if equipped)
Use the driver's
door mounted
controls to:
• Adjust driver
seat, including
lumbar
adjustment
• Adjust gas and
brake pedals
• Adjust the outside rearview mirrors
• Set the radio presets and climate
control temperature (the climate
control temperature setting will revert
to the last temperature setting used)
• Press and hold Memory 1 or 2 until
two chimes sound (about four
seconds)
• To set up for another driver, repeat
the process with the other memory
button
These settings will be remembered after
they are programmed by pressing the
Memory 1 or 2
button on the
driver's door
(shown above).
If you unlock the
vehicle with the
Remote Keyless
Entry (RKE)
transmitter, the
vehicle memory
settings will correspond to the number
on the RKE transmitter: 1 or 2.
See Section 2 of your Owner Manual.