Customer Service Information; Care And Maintenance; Caring For Your Product; Service - Polar Electro CS600X Getting Started Manual

Polar cs600x cycling computer
Hide thumbs Also See for CS600X:
Table of Contents

Advertisement

ENGLISH

6. CUSTOMER SERVICE INFORMATION

Care and Maintenance

Caring for Your Product

Cycling computer: Keep your cycling computer clean.
Clean it with a mild soap and water solution and rinse
them with clean water. Do not immerse the cycling
computer in water. Dry it carefully with a soft towel. Never
use alcohol or any abrasive material such as steel wool or
cleaning chemicals.
Connector: Detach the connector from the strap after every
use and dry the connector with a soft towel. Clean the
connector with a mild soap and water solution when
needed. Never use alcohol or any abrasive material (eg.
steel wool or cleaning chemicals).
Strap: Rinse the strap under running water after every use
and hang to dry. Clean the strap gently with a mild soap
and water solution when needed. Do not use moisturizing
soaps, because they can leave residue on the strap. Do not
soak, iron, dry clean or bleach the strap. Do not stretch
the strap or bend the electrode areas sharply.
Check the label on your strap to see if it is machine washable.
Never put the strap or the connector in a dryer!
18
Customer Service Information
Dry and store the strap and the connector separately, to
maximize the heart rate sensor battery lifetime. Keep your
cycling computer and heart rate sensor in a cool and dry
place. Do not store them in a damp environment, in
non-breathable material (a plastic bag or a sports bag) nor
with conductive material (a wet towel). Do not expose
them to direct sunlight for extended periods, such as by
leaving it in a car or mounted on the bike mount.
The cycling computer and sensors are water resistant and
can be used in the rain. To maintain the water resistance,
do not wash the cycling computer or sensors with a
pressure washer or sink them under water. Avoid hard hits
on the cycling computer and the sensors as these may
damage them. Operating temperatures are -10 °C to +50
°C / +14 °F to +122 °F.

Service

During the two-year guarantee/warranty period we
recommend that you have service, other than battery
replacement, done by an authorized Polar Service Center
only. The warranty does not cover damage or
consequential damage caused by service not authorized by
Polar Electro.

Advertisement

Table of Contents
loading

Table of Contents