Telephone Line Setting - Canon FAX-L160 Reference Manual

Before Using the
Machine 1
FAX SETTINGS
Document and Paper
2
1. RX MODE
Sending and
Receiving 3
Copying
4
2. USER SETTINGS
Printing (FAX-L160
Only)
5
System Manager
Settings 6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Setting Item
1. UNIT TELEPHONE #
2. UNIT NAME
3. TX TERMINAL ID
ON
OFF
4. TEL LINE TYPE
5. STANDARD SETTINGS
1. DENSITY
2. IMAGE QUALITY
Selects the receive mode. (See "Set the Machine for Receiving Faxes," in the Starter Guide.)
– FaxOnly
– AnsMode
– FaxTel
– MANUAL
Specifies the basic operation settings in the fax mode.
Registers your fax number (max. 20 characters, including spaces). (See "Set the Machine for
Sending Faxes," in the Starter Guide.)
Registers your name/company name (max. 32 characters, including spaces). (See "Set the
Machine for Sending Faxes," in the Starter Guide.)
Sets the options for sender information.
Sender information is printed in small type at the top of each page.
Sender information is not printed.
Selects the telephone line type. (See "Telephone Line Setting," on p. 1-13.)
– TOUCH TONE
– ROTARY PULSE
Sets the default setting for faxing.
Sets the default density for faxing. (1–9 (5))
Sets the default image quality for faxing.
– STANDARD
– FINE
– PHOTO
– SUPER FINE
Back Previous Next
Description
TOP
9-7