Remote Reception; Press [Stop/Reset] To Return To The Standby - Canon FAX-L160 Reference Manual

Before Using the
Machine 1
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing (FAX-L160
Only)
5
System Manager
Settings 6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
11.
For <MEM. RX END TIME>, use the numeric keys
to enter the end time (in 24-hour format), then
press [OK].
12.

Press [Stop/Reset] to return to the standby

mode.
Printing All Documents Stored in Memory
1.
Perform step 1 to 3 in "Memory Lock Reception,"
on p. 3-26.
2.
Press [ ] or [ ] to select <MEMORY LOCK>,
then press [OK].
3.
Use the numeric keys to enter the memory lock
reception password, then press [OK].
4.
Press [ ] or [ ] to select <OFF>, then press
[OK].
The received documents are printed.
5.
Press [Stop/Reset] to return to the standby
mode.
Back Previous

Remote Reception

Remote reception enables you to use an external telephone
connected to the machine to receive faxes manually. This can be
useful when the machine is not nearby or is being used by someone
else.
The default settings are as follows:
– REMOTE RX: <ON>
– REMOTE RX ID: <25>
Registering Remote Reception ID
Follow this procedure if you want to change the default remote
reception ID of 25.
1.
Press [Menu].
2.
Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4.
Press [ ] or [ ] to select <REMOTE RX>, then
press [OK].
5.
Press [ ] or [ ] to select <ON>, then press
[OK].
TOP
Next
3-27