Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Revo RESPTZ37-SERIES
Summary of Contents for Revo RESPTZ37-SERIES
-
Page 1: User Manual
24 VAC @ 60 Hz, 12W NTSC Publication No. RESPTZ37-10B REVO America Copyright © 2013 REVO America Inc. All rights reserved. 700 Freeport Parkway Suite 100 REVO and its logo are trademarks of REVO America Inc. Coppell, TX 75019 1-800-6250-REVO (7386) - Page 2 REVO America wants to ensure that your installation experience is a safe and pleasant one. Please read and adhere to these Safety Instructions. CAUTION Model RESPTZ37-1 is an indoor camera and not meant for outdoor use. Models RESPTZ37-1HSC and RESPTZ37-1HSW are provided with weather-proof enclosures and can be used outdoors.
-
Page 3: Fcc Compliance
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating or maintenance instructions that should be noted to avoid damage to the equipment or loss of data. REVO America www.revoamerica.com RESPTZ37-SERIES... -
Page 4: Table Of Contents
Installing the Camera ..............................15 Wiring ..................................15 Camera Configuration ..............................18 Getting Started ................................18 Understanding the Dome Menu ..........................20 Camera ..................................21 Dome Setup ................................27 Specifications .................................. 38 Troubleshooting ................................39 Glossary ..................................41 REVO America www.revoamerica.com RESPTZ37-SERIES... -
Page 5: Features
• IP66 rated for durability, vandal resistance and operation in dusty or wet environments (Outdoor models) Browse the entire manual prior to installing the camera. There is a lot of useful information and tips that will help you to install your system effectively. REVO America www.revoamerica.com RESPTZ37-SERIES... -
Page 6: What's In The Box
’ ’ The RELPTZ37 Series consists of three models that are preconfigured as follows: Model RESPTZ37-1 Indoor Flush-Mount Dome Camera Model RESPTZ37-1HSC Outdoor Ceiling-Mount Dome Camera REVO America www.revoamerica.com RESPTZ37-SERIES... - Page 7 Each model is provided with mounting hardware and installation guide. Refer to the following manuals for installation and mounting instructions. Model Manual RESPTZ37-1 Indoor Flush-Mount Dome Camera HCS251-HV RESPTZ37-1HSC Outdoor Ceiling-Mount Dome Camera RESPTZH-1 RESPTZ37-1HSW Outdoor Wall-Mount Dome Camera REVO America www.revoamerica.com RESPTZ37-SERIES...
-
Page 8: Settings
Use a small paper clip to set the DIP switches to ensure that you set each one correctly. Figure 1. Removing Bottom Cover NOTE Setting DIP switches correctly is very important. If you do not set them correctly, there will be communication errors. REVO America www.revoamerica.com RESPTZ37-SERIES... -
Page 9: Setting Camera Termination
Set this using DIP switch SW1 (Figure 2). If this camera is to be the last device, set SW1 DIP switches 1 and 2 to ON as shown below. If it is not the last device, set the switches to OFF. Terminated terminated REVO America www.revoamerica.com RESPTZ37-SERIES... -
Page 10: Fail-Safe Network
DVRs. Using these devices, you can set up the camera and all of the functions. The ideal way to do this is using a REVO keyboard. It provides the easiest way to take full advantage of the camera’s capabilities. It also provides a fail-safe network by protecting the camera if any of the following conditions occur: •... -
Page 11: Setting Camera Address
Switches S1 through S3 (Figure 2) are used to set the camera address. Apply the settings for each camera in your video system as shown in the following table. Up to 999 cameras may be set REVO America www.revoamerica.com RESPTZ37-SERIES... -
Page 12: Figure 4. Setting Camera Addresses
Setting Camera Protocol, Video Standard, Baud Rate and Parity (Optional) If you are using a REVO America keyboard controller and using the camera in the United States or other NTSC standard country, there is no need to change the default settings of switches S4, S5 and S6 (Figure 2). - Page 13 The following settings are used to set the protocol the camera will use to communicate with the video controller. If you are using a keyboard controller or DVR other than REVO America, check the protocol required and set switch S5 as follows:...
- Page 14 To change the BAUD rate and Parity to match your keyboard controller, set switch S5-4 and S6 as follows: S5-4 S6-1 S6-2 2400 bps 4800 bps 9600 bps (Default) 19200 bps 38400 bps ARITY S6-3 None Even REVO America www.revoamerica.com RESPTZ37-SERIES...
-
Page 15: Dimensions
The dimensions shown in Figure 5 are for the base camera unit. To view the dimensions for your model, refer to the following installation manuals. Model Manual RESPTZ37-1 Indoor Flush-Mount Dome Camera HCS251-HV RESPTZ37-1HSC Outdoor Ceiling-Mount Dome Camera RESPTZH-1 RESPTZ37-1HSW Outdoor Wall-Mount Dome Camera Figure 5. Dimensions REVO America www.revoamerica.com RESPTZ37-SERIES... -
Page 16: Installation
Class 2 power supply and if you choose to connect alarms or sensors, other wiring. Make sure that you can provide the wiring to the locations that you select, and that power is available for the power supply. Contact REVO America for all the accessories that you will need to install the camera. -
Page 17: Installing The Camera
Never work with power on. You should always disconnect electrical power prior to installation or removal of any equipment. A typical system configuration is shown in Figure 6. Figure 7 shows the wiring connections. Figure 6. Typical System Configuration REVO America www.revoamerica.com RESPTZ37-SERIES... - Page 18 Figure 7. Dome Camera Wiring REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 19 Alarm Output (NC/NO1 thru NC/NO4 and GND): The dome camera can activate up to 4 external devices such as buzzers or lights upon motion detection. GND is the common ground. Refer to the Programming and Operation instructions for more information on using these functions REVO America www.revoamerica.com RESPTZ37-SERIES...
-
Page 20: Camera Configuration
This is the ideal setup and offers the greatest flexibility and ease of operation. However, a REVO America DVR may also be used to control the camera, as well as non REVO America keyboard controllers or DVRs, which may be used providing you set the protocols correctly. See the Settings section. - Page 21 Access the camera menu as follows: 1. Log into the keyboard controller by entering the administrator’s password. On the REVO America keyboard controller, the default password is: 9999. 2. Select camera by pressing the camera number, for example 1, and then the CAM key on the keyboard controller.
-
Page 22: Understanding The Dome Menu
A user defined name for a specific area that the camera views that has a specific pan and tilt range. This menu guides you through the process of defining and naming the area. Advanced Features manual. REVO America www.revoamerica.com RESPTZ37-SERIES... -
Page 23: Camera
IMAGE FLIP : OFF PRESET FREEZE : OFF STABILIZATION : OFF : MID MOVING DNR : MID SAVE AND EXIT(ESC TO CANCEL) FOCUS CONTROL The Focus Control submenu controls camera focus options including automatic and manual modes. REVO America www.revoamerica.com RESPTZ37-SERIES... - Page 24 The White Balance WB setup submenu provides control to adjust the color hue (red and blue) gain for a camera so that true white appears white in the image. It is normally compensated for by the automatic gain control (AGC). In REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 25 MANUAL: Enables setting of RGAIN (Red) and BGAIN (Blue) manually to obtain white balance. RGAIN: Red Gain. Adjustable from 0-200. BGAIN: Blue Gain. Adjustable from 0-200. RGAIN / BGAIN modes are controllable only in MANUAL mode. REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 26 SLOW SHUTTER: Used in low light situations. ON/OFF. IRIS: 0 (closed) to 255 (f1.5). GAIN LIMIT: 1-10. REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 27 Night Shot mode. Pressing 888 + ENTER on the keyboard controller will turn on Night Shot mode. ON: B&W mode. OFF: Color mode. Night Shot Auto is available when Auto or Iris Prio modes are selected. REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 28 OFF/ON. Stabilizes image in windy or other conditions that would cause camera to shake. DNR: Digital Noise Reduction. Minimizes noisy video when camera is on a still shot, that is, no panning, tilting or zooming. OFF/LOW/MIDDLE/HIGH. REVO America www.revoamerica.com RESPTZ37-SERIES...
-
Page 29: Dome Setup
English, French, German, Italian, Spanish, Polish or Portuguese are options HOME FUNCTION SETUP Displays the following submenu: HOME FUNCTION SETUP HOME FUNCTION Preset FUNCTION NUMBER : WAITING TIME 120 SEC FUNCTION ENABLE : SAVE AND EXIT(ESC TO CANCEL) REVO America www.revoamerica.com RESPTZ37-SERIES... - Page 30 OSD DISPLAY SETUP CAMERA TITLE : DOMEID VIEW DIRECTION : OFF DOME OSD : ON AREA TITLE : OFF PRESET TITLE : CONSTANT FOCUS EXPOSURE : ON OSD POSITION SETUP SAVE AND EXIT(ESC TO CANCEL) REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 31 See the OSD Position Setup menu that follows. OSD Position Setup Screen (AREA TITLE) (AF AE) (FUNC TITLE (CTRL KEY TO MOVE) SAVE AND EXIT(ESC TO CANCEL) (ALARM MESSAGE) DOMEID…XXX XXX.X XXX.X REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 32 4. Set ENABLE to ON to use 5. To exchange the right and the left limit, set SWAP to ON. 6. To apply limits on the AUTO PAN (endless panning), set AUTO PAN to ON. REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 33 The Initialize Data submenu will allow you to reset some or all of the factory default settings and erase any programming that you have done. CAUTION Use care when accessing the Initialize Data menu. Depending upon your selections, it will erase all your custom settings. REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 34 The erased data includes all stored data (Auto Scan, Preset, and Tour….) except Origin Offset. The Origin Offset value is still valid after all data is erased. See the Origin Offset section that follows for more information. REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 35 Note that the Initialize Data and Dome Reset functions will not override the Origin Offset values. If you want to change the offset value that you have set, you can do it using this menu. REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 36 This submenu is used to reset the dome camera. If you select OK, the dome will go through a reset procedure. CAUTION Use care when accessing the Dome reset menu. It will recalibrate the orientation of the dome. DOME RESET ARE YOU SURE ? CANCEL REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 37 TURBO PAN MAXIMUM : 360°/SEC TURBO TILT MAXIMUM : 100°/SEC SAVE AND EXIT(ESC TO CANCEL) PROPORTIONAL P/T : ON/OFF P/T MODE : SLOW/NORMAL/TURBO SLOW PAN MAXIMUM : 19-90˚/second SLOW TILT MAXIMUM : 19-90˚/second NORMAL PAN MAXIMUM : 40-360˚/second REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 38 SAVE AND EXIT(ESC TO CANCEL) ORIGIN CHECK If the camera is out of position during operation and you want to reset it to the origin position, using this function will reset it. ORIGIN CHECK ARE YOU SURE ? CANCEL REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 39 From this screen, you can determine the camera type, hardware and ROM versions. SYSTEM INFORMATION CAMERA TYPE : xxxxx-xxxxxx H/W VERSION : Vx.xx ROM VERSION : Vx.xx PROTOCOL : xxxx BAUDRATE : 9600 EXIT(ESC TO EXIT) REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 40 Control Protocol: bps), REVOTRAX, Pelco-D, Pelco-P ID (Camera Address): 1 - 255 Dimensions: See Figure 3. Certifications: CE EMC, FCC Class A, CSA Input Voltage: 18 to 30 VAC; 24 VAC, nominal Current: 1 A ,nominal REVO America www.revoamerica.com RESPTZ37-SERIES...
-
Page 41: Specifications
• Check the voltage level of the camera. • If using a multiplexer. Check the camera ID Camera number does not match and insert the BNC cable into the proper the multiplexer number. input of the multiplexer. REVO America www.revoamerica.com RESPTZ37-SERIES... - Page 42 • Check Line Lock setting and adjust phase Picture is torn when switching of line lock. CAUTION Do not open the camera or attempt repair of the internal parts. REVO America www.revoamerica.com RESPTZ37-SERIES...
-
Page 43: Glossary
Once the control is released, the tilt control returns to its normal operational mode. The flip feature is useful when you need to track someone who walks directly beneath the dome and continues on the other side. REVO America www.revoamerica.com RESPTZ37-SERIES... - Page 44 Direction Indicators are enabled. Slow Shutter Setting used to improve the quality of video obtained in extreme low-light situations. When the Slow Shutter setting is enabled, low-light information is collected over multiple fields based on the REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 45 White Balance is enabled, the camera measures the image and automatically adjusts the red and blue settings to balance white. When Automatic White Balance is disabled, the camera uses the values set for the red and blue settings to balance white. REVO America www.revoamerica.com RESPTZ37-SERIES...
- Page 46 REVO America Copyright © 2013 REVO America Inc. All rights reserved. 700 Freeport Parkway Suite 100 REVO and its logo are trademarks of REVO America Inc. Coppell, TX 75019 Issued 01/13 1-800-6250-REVO (7386)