Revo REHCUW-1 Instruction Manual
  1. Manuals
  2. Brands
  3. Revo Manuals
  4. Security Camera
  5. REHCUW-1
  6. Instruction manual

Revo REHCUW-1 Instruction Manual

Elite hd mini cube network camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
REHCUW-1
REVO ELITE HD
Mini Cube

Network Camera

Please read this manual thoroughly before use, and keep it handy for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Revo REHCUW-1

Summary of Contents for Revo REHCUW-1

  • Page 1: Network Camera

    INSTRUCTION MANUAL REHCUW-1 REVO ELITE HD Mini Cube Network Camera Please read this manual thoroughly before use, and keep it handy for future reference.
  • Page 2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOIST URE. DO NOT INSERT ANY MET ALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. APPARATUS SHALL NOT BE EXPOSED T O DRIPPING OR SPL ASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS , SUCH AS VASES, SHALL BE PL ACED ON THE APPARATUS.

  • Page 3: Fcc Compliance Statement

    FCC COMPLIANCE STATEMENT FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION.
  • Page 4 HEREBY, REVO AMERICA CORP DECLARES THAT THIS PRODUCT IS IN COMPLIANCE WITH THE ESSENTIAL REQUIREMENTS AND OTHER RELEVANT PROVISIONS OF DIRECTIVE 1999/5/EC. A COPY OF THE ORIGINAL DECLARATION OF CONFORMITY MAY BE OBTAINED FROM REVO AMERICA CORP 700 FREEPORT, PKW #100, COPPELL, TX, USA THIS DIGITAL EQUIPMENT FULFILLS THE REQUIREMENTS FOR RF EMISSION ACCORDING TO THE CLASS B LIMIT OF EN 55022.

  • Page 5: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not bloc k any ventilation openings. Install in accor dance with the manuf acturer’s instructions.

  • Page 6: Table Of Contents

    Contents 1. Description ------------------------------------------------------------------7 1.1 Components - ------------------------------------------------------------------------------------------ 7 1.2 Key Features - ------------------------------------------------------------------------------------------ 7 1.3 Over View ---- ------------------------------------------------------------------------------------------ 9 2. Installation ----------------------------------------------------------------- 10 2.1 Connection ---- ----------------------------------------------------------------------------------------- 10 2.2 Network Connection and IP Assignment ---------------------------------------------------------- 11 3. Operation -------------------------------------------------------------------- 12 3.1 Access from a browser -------------------------------------------------------------------------------- 12 3.2 Access from the internet ------------------------------------------------------------------------------ 13 3.3 Setting the admin password over a secure connection ------------------------------------------- 13...

  • Page 7: Description

    1. Description The Network Camera provides a network service for a progressive scan sensor that can be monitored on a real-time screen regardless of distance and location. By using its dedicated program, many users are able to access the Network Camera at once, or a single user can monitor various network cameras at the same time.
  • Page 8 • Image setting adjustment The Network Camera also enables users to adjust image settings such as contrast, brightness and saturation to improve images before encoding takes place. • Intelligent video capabilities The Network Camera includes intelligent capabilities such as enhanced video motion detection. The network camera’s external inputs and outputs can be connected to devices such as sensors and relays, enabling the system to react to alarms and activate lights or open/close doors.

  • Page 9: Overview

    1.3 Overview • Front View [BASIC MODEL] [FULL-FEATURED MODEL] • Rear View Name Description The camera is equipped with a PIR Sensor that has a maximum range of PIR Sensor(option) 5 meters for detecting movement in the dark. The camera is equipped with a Microphone and Speaker. Two-way audio Microphone/Speaker support allows for remote users to listen in on an area and communicate (option)

  • Page 10: Installation

    Dimensions Unit: mm 2. Installation 2.1 Connection • Connecting to the RJ-45 Connect a standard RJ-45 cable to the network port of the network camera. Generally a cross-over cable is used for direct connection to a PC, while a direct cable is used to connect to a hub.

  • Page 11: Network Connection And Ip Assignment

    2.2 Network Connection and IP assignment The Network Camera supports the operation through the network. When a camera is first connected to the network it has no IP address. So, it is necessary to allocate an IP address to the device with the “Smart Manager”...

  • Page 12: Operation

    3. Operation The Network Camera can be used with Windows operating system and browsers. The recommended browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome for Windows. NOTE: To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls.

  • Page 13: Access From The Internet

    3.2. Access from the internet Once connected the Network Camera on your local network (LAN) will be accessible via the internet. To access the network camera from the Internet you must configure your broadband router to allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the network camera.

  • Page 14: Live View Page

    3.4 Live View Page The live view page comes in several screen modes: 1600x1200, 1280x1024, 1280x720, 800x600, 704x480(576), 640x480, 352x240(288), and 320x240. Users are allowed to select the most suitable one out of those modes. Please, adjust the mode in accordance with your PC specifications and monitoring purposes.
  • Page 15 The digital zoom activates a zoom-in or zoom-out function for the video image on the live screen. The Full Screen button causes the video image to fill the entire screen area. No other windows will be visible. Press the 'Esc' button on the computer keyboard to cancel full screen view.

  • Page 16: Network Camera Setup

    3.5 Network Camera Setup This section describes how to configure the network camera, and is intended for product Administrators, who have unrestricted access to all the Setup tools; and Operators, who have access to the settings for Basic, Live View, Video & Image, Audio, Event, and System Configuration. You can configure the network camera by clicking Setup in the top right-hand corner of the Live View page.

  • Page 17: Users

    1) Users User access control is enabled by default. An administrator can set up other users, by giving these user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page, as described below: The user list displays the authorized users and user groups (levels): User Group Authority...

  • Page 18: Network

    2) Network The network camera supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must always be enabled. When using IPv4, the IP address for the network camera can be set automatically via DHCP, or a static IP address can be set manually. If IPv6 is enabled, the network camera will receive an IP address according to the configuration in the network router.

  • Page 19: Video & Image

    3) Video & Image • Sensor Setting Capture Mode: Choose Capture Mode you wish to use from the drop-down list: 1600x1200 Max 15fps: Capture resolution is 1600x1200 and Maximum frame is 15. 1280x720 Max 30fps: Capture resolution is 1280x720 and Maximum frame is 30. 800x600 Max 30fps: Capture resolution is 800x600 and Maximum frame is 30.
  • Page 20 H.264 MP(Main Profile): Primarily for low-cost applications that requires additional error robustness, this profile is used rarely in videoconferencing and mobile applications, it does add additional error resilience tools to the Constrained Baseline Profile. The importance of this profile is fading after the Constrained Baseline Profile has been defined.

  • Page 21: Audio

    • Stream2 Setting Sometimes the image size is large due to low light or complex scenery. Adjusting the frame rate and quality helps to control the bandwidth and storage used by the Motion JPEG video stream in these situations. Limiting the frame rate and quality optimizes bandwidth and storage usage, but may give poor image quality.

  • Page 22: Audio Input

    • Audio Setting Enable audio: Check the box to enable audio in the video stream. Compression type: Select the desired audio Compression format, G711. Sample rate: Select the required Sample rate (number of times per second the sound is sampled). The higher the sample rate, the better the audio quality and the greater the bandwidth required.

  • Page 23: Date & Time

    5) Date & Time • Current Server Time It displays the current date and time (24h clock). The time can be displayed in 12h clock format in the overlay (see below). • New Server Time Select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time, select the “Automatically adjust for daylight saving time changes”.

  • Page 24: Video & Image

    3.5.2 Video & Image  Live View Video Input Mode • Video Mode: Choose Video Mode you wish to use from the drop-down list: NTSC or PAL...
  • Page 25  Basic Refer to “3.5.1 Basic Configuration > Video & Image” for more details.
  • Page 26  Image • Image Appearance This page provides access to the advanced image settings for the network camera. Brightness: The image brightness can be adjusted in the range 1-10, where a higher value produces a brighter image. Contrast: Adjust the image's contrast by raising or lowering the value in this field. Saturation: Select an appropriate level by entering a value in the range 1-10.
  • Page 27  AE & AWB This page provides access to set the exposure and white balance of the network camera. • Exposure Control Configure the exposure settings to suit the image quality requirements in relation to lighting consideration. Mode: Supports exposure modes to control the amount of light detected by the camera sensor based on settings for light conditions.
  • Page 28 From the drop-down list, select the white balance setting suitable f or the lighting used f or your camera. The available options are: Automatic: Automatic identification and compensation for the light source color. This can be used in most situations and is the recommended setting. Fixed Incandescent: Fixed color adjustment, ideal for a room with incandescent (a glow) lighting and good for a normal color temperature around 2600K.
  • Page 29 To create a mask window, follow steps: Click the right button of mouse to see the mouse menu. Select New Privacy Mask in the mouse menu. Click and drag mouse to designate a mask window area. You can also modify or delete a mask window index. Select an index and then, modify items or delete button.

  • Page 30: Audio

    3.5.3 Audio Refer to “3.5.1 Basic Configuration > Audio” for more details.

  • Page 31: Event

    3.5.4 Event 1) Event-In  On Boot This is used to trigger the event every time the Network Camera is started. Select “Enable” to activate the motion event.
  • Page 32  Manual Trigger This option makes use of the manual trigger button provided on the live view page, which is used to start or stop the event type manually. Alternatively the event can be triggered via the product's API (Application Programming Interface).
  • Page 33  Motion Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. A total of 8 Motion and/or Mask windows can be created and configured. Motion is detected in defined Motion windows, which are placed in the video image to target specific areas.
  • Page 34 • Motion Detection Setting The behavior for each window is defined by adjusting the Threshold and Sensitivity, as described below. A motion index is a set of parameters describing Window Name, Type, Threshold, Sensitivity, and Dwell Time. Window Types is one of Motion and Mask windows. Threshold: Sets up the threshold for the motion detection.
  • Page 35  PIR The camera is also able to detect motion using the PIR Sensor. Since the PIR Sensor can detect a moving infrared object such as a person in the dark, it can be used as an intruder alarm when, for example, a thief tries to break into a building at night.
  • Page 36  Audio Detection The camera is also able to detect change of the ambient voice using a built-in microphone. Audio detection can be used to measure change in the ambient voice. • Audio Detection Setting Select the sensitivity from the drop-down menu. Audio Detection Level: Be used to adjust the sensitivity of the audio level from 10-100%.

  • Page 37: Event-Out

    2) Event-Out  SMTP(E-Mail) The Network Camera can be configured to send event and error email messages via SMTP (Simple Mail Transfer Protocol). • SMTP(E-Mail) Setting Select “Enable” to activate the SMTP operation. Mail Server / Port: Enter the host names (or IP addresses) and port numbers for your mail server in the fields provided, to enable the sending of notifications and image email messages from the camera to predefined addresses via SMTP.
  • Page 38 Login Method: Set the Weakest method allowed to the highest/safest method supported by the mail server. The most secure method is listed in the drop-down list: Login / Plain • SMTP(E-Mail) Receiver Receiver: Enter an email address. You can also register the e-mail address of recipients up to 8.
  • Page 39 • JPEG Setting Pre-event: A pre-event buffer contains images from the time immediately preceding the event trigger. These are stored internally in the server. This buffer can be very useful when checking to see what happened to cause the event trigger. Check the box to enable the pre-trigger buffer, enter the desired total length in seconds, minutes or hours, and specify the required image frequency.
  • Page 40  Audio Alert When the network camera detects an event, it can output a predefined audio data file to an external speaker. Check the box to enable the service. • Audio Alert Setting To use the audio alert with the Network camera, an audio data file made by user must be uploaded from your PC.
  • Page 41 To use the Audio Recorder tool to make an audio file for Audio Alert function, you must install the REVO PRO HD program on the installation CD at first. To run the REVO REMOTE PRO HD program (Start>All Programs>CMS>Tools> ARecorder) in your PC, the ARecorder window will be displayed as below.
  • Page 42 Caution: All parameters must be synchronized with the ones in the audio setting page of the network devices for a proper operation. ▼ Record When the network camera detects an event, it can record the video stream to the Micro SD card (not supplied) or NAS (Network Attached Device) as a storage device.

  • Page 43: Device Information

    requires a large number of request/response transactions and its performance degrades significantly over high-latency WAN links such as the Internet. Note2: Network File System (NFS) is a network file system protocol, allowing a user on a client computer to access files over a network in a manner similar to how local storage is accessed.
  • Page 44 ▼ Light The LED light located on the front of the camera can be set to flash at a configurable interval when an event is triggered. Enable light: Select “Enable” to activate the light operation. • Keep active during event: Select checkbox the light stays on during event dwell time. Keep active for: Select checkbox the light stays on for selected seconds or minutes.

  • Page 45: Event Map

    3) Event Map The event map allows you to change the settings and establish a schedule for each event trigger from the Network Camera. You can register the event map up to max. 15. Click Add button to make a new event map and the following popup window will be displayed:...
  • Page 46 • General Enter the name for a new event map. • Event In Select an event type in the drop down list. • Event Out E-mail: Select email addresses you want to send via email that an event has occurred. FTP: Select checkbox beside FTP to record and saves images to an FTP server when an ent has occurred.

  • Page 47: System

    3.5.5 System 1) Information You can enter the system information. This page is very useful when you refer device information after installation. • Device Name Configuration Enter the device name. • Location Configuration Enter the location information. Four lines of description are available...

  • Page 48: Security

    2) Security  Users User access control is enabled by default, when the administrator sets the root password on first access. New users are authorized with user names and passwords, or the administrator can choose to allow anonymous viewer login to the Live View page, as described below: •...
  • Page 49  HTTPS For greater security, the Network Camera can be configured to use HTTPS (Hypertext Transfer Protocol over SSL (Secure Socket Layer)). That is, all communication that would otherwise go via HTTP will instead go via an encrypted HTTPS connection. •...
  • Page 50  IP Filtering Checking the Enable IP address filtering box enables the IP address filtering function. Up to 256 IP address entries may be specified (a single entry can contain multiple IP addresses). Click the Add button to add new filtered addresses. When the IP address filter is enabled, addresses added to the list are set as allowed or denied addresses.

  • Page 51: Date & Time

    3) Date & Time • Current Server Time It displays the current date and time (24h clock). The time can be displayed in 12h clock format in the overlay (see below). • New Server Time Select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time, select “Automatically adjust for daylight saving time changes”.
  • Page 52 Network setting parameters can be set here. Settings for IP, DNS, Host Name, Port, and ARP/Ping can be established, along with setting for DDNS, UPnP, QoS, Zeroconfig, Bonjour, Live Push, Hole Punching, and wireless.
  • Page 53  Basic • IP Address Configuration: Obtain IP address via DHCP: Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network administrators centrally manage and automate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP server is mostly used to set an IP address dynamically, it is also possible to use it to set a static, known IP address for a particular MAC address.
  • Page 54  DDNS • Internet DDNS(Dynamic Domain Name Service) When using the high-speed Internet with the telephone or cable network, users can operate the Network Camera even on the floating IP environment in which IPs are changed at every access. Users should receive an account and password by visiting a DDNS service like http://www.dyndns.com/, or http://www.cctv-network.co.kr/.
  • Page 55  RTP Have a setting for sending and receiving an audio or video on a real-time basis. These settings are the IP address, port number, and Time-To-Live value to use for the media stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For more information, please see the online help.
  • Page 56  UPnP The Network Camera includes support for UPnP™. UPnP™ is enabled by default, and the Network Camera then is automatically detected by operating systems and clients that support this protocol. Note: UPnP™ must be installed on your workstation if running Windows XP. To do this, open the Control Panel from the Start Menu and select Add/Remove Programs.
  • Page 57  QoS Quality of Service (QoS) provides the means to guarantee a certain level of a specified resource to selected traffic on a network. Quality can be defined as a maintained level of bandwidth, low latency, and no packet losses. The main benefits of a QoS-aware network are: The ability to prioritize traffic and thus allow critical flows to be served before flows with lesser priority.
  • Page 58 Management DSCP: • Auto Traffic Control Set a limitation on user network resources by designating the maximum bandwidth. Maximum bandwidth: In case of sharing other network programs or equipment, it is possible to set a limitation on the maximum bandwidth in the unit of Mbit/s or kbit/s. Auto frame rate: Selected if not influenced by a network-related program or equipment without a limitation on the network bandwidth.
  • Page 59 • NAT traversal Settings Enable: when enabled, the network camera attempt to configure port mapping in a NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the Network Camera (see System>Network>UPnP). automatic setting: The Network Camera automatically search for NAT routers on your network.
  • Page 60  Zeroconfig Zeroconfig allows the network camera to create and assign IP address for network cameras and connect to a network automatically. Zero configuration networking (zeroconf), is a set of techniques that automatically creates a usable Internet Protocol (IP) network without manual operator intervention or special configuration servers. Zero configuration networking allows devices such as computers and printers to connect to a network automatically.
  • Page 61  Bonjour The network camera includes support for Bonjour. When enabled, the network camera is automatically detected by operating systems and clients that support this protocol. Note: Bonjour - Also known as zero-configuration networking, Bonjour enables devices to automatically discover each other on a network, without having to enter IP addresses or configure DNS servers.
  • Page 62  Live Push • Live Push Configuration When you activate this function, the network camera as a client can transfer audio, video and event data to the registered server. The network camera and server use RTP/RTSP as the protocol for the actual transport of audio/video data.
  • Page 63  Hole Punching • Hole Punching Configuration Rendezvous Server URL: Enter the third-party server’s URL that uncovers external and internal address information. ID/Password: Enter ID and Password. The network camera will ask them whenever you access the Rendezvous Server. Note: Hole punching is a computer networking technique for establishing communications between two parties in separate organizations who are both behind restrictive firewalls.

  • Page 64: Language

    applications on the Internet involving hosts connected in private networks, especially in peer-to- peer and Voice over Internet Protocol (VoIP) deployments. 5) Language This allows the selections of a user language. The selectable languages are English, French, German, Spanish and Italian. 6) Maintenance •...

  • Page 65: Support

    • Update Server Carry out the upgrade by importing an upgrade file and pressing the Upgrade button. During the upgrade, do not turn off the power of the Network Camera. Attempt to access it again after waiting five minutes or longer. •...

  • Page 66: About

    3.5.6 About REVOAMERICA.COM will provide the support information for the Network Camera information and operation. 3.6 Playback The Playback window contains a list of recordings made to the memory card. It shows each recording's start time, length, the event type used to start the recording, calendar and time slice bar indicates if the recording is existed or not.
  • Page 67 ause: pause playback of the video clip. Go to the last: go to the end of video clip. Forward Play: play forward the video clip. Fast forward play: play fast forward of the video clip. Step forward play: go forward one frame of the video clip. Clip copy: copy the video clip.

  • Page 68: Help

    3.7 Help The Help information window will be provided as a popup window so that users can open and read it without a need for log-in. It will offer a description on settings and Help page by which users can manipulate the Network Camera without a reference to the manual.

  • Page 69: Resetting To The Factory Default Settings

    3.8 Resetting to the factory default settings To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance web page (described in “3.5.5 System > Maintenance”) or use the Reset button on the network camera, as described below: •...

  • Page 70: Appendix

    4. Appendix 4.1 Troubleshooting Troubleshooting: If problems occur, verify the installation of the Network Camera with the instructions in this manual and with other operating equipment. Isolate the problem to the specific piece of equipment in the system and refer to the equipment manual for further information. Problems/Symptoms Possible Causes or Corrective Actions The camera cannot be accessed...

  • Page 71: Preventive Maintenance

    4.2 Preventive Maintenance Preventive maintenance allows detection and correction of minor faults before they become serious and cause equipment failure. Every three months, perform the following maintenance steps: Inspect all connection cables for deterioration or other damage. Clean components with a clean damp cloth. Verify that all the mounting hardware is secure.

  • Page 72: Product Specification

    Factory Reset Yes, Button/Web browser Auto Recovery Installation Tool SmartManager, REVO REMOTE PRO HD Upgrade Web browser, SmartManager, REVO REMOTE PRO HD Ethernet RJ-45 10BASE-T/100BASE-TX Passive infrared (PIR) motion sensor with configurable sensitivity. PIR Sensor(option) Max range: 5m, 60°(H) x 20°(V)

  • Page 73: System Requirement For Web Browser

    DC5V 700mA / PoE 48V 73mA / 3.5W Power Consumption Power over Ethernet IEEE 802.3af Class0 Dimensions (W x H x D) 62mm x 97mm x 38.4mm (without Stand) Unit Weight System Requirement for Web Browser Operating System: Microsoft Windows 98, Microsoft Windows ME, Microsoft Windows 2000, Microsoft Windows XP, or Microsoft Windows Vista CPU: Intel Core 2 Duo 2Ghz or higher, 1GB RAM or more, 10GB free disk or higher VGA: AGP, Video RAM 32MB or higher (1024x768, 24bpp or higher)
  • Page 74 HD Mini Cube Network Camera Printed in Korea...

Table of Contents