Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Revo RELPTZ22-3
Summary of Contents for Revo RELPTZ22-3
-
Page 1: Advanced Features
Model RELPTZ22-3 12 VDC/650 mA NTSC Publication No. RELPTZ22-10AF REVO America 700 Freeport Parkway Suite 100 Copyright © 2012 REVO America Inc. All rights reserved. Coppell, TX 75019 REVO and its logo are trademarks of REVO America Inc. 1-800-6250-REVO (7386) - Page 2 Please read and adhere to these Safety Instructions. CAUTION Model RELPTZ22-3 is an indoor camera and not meant for outdoor use. Doing so will void the warranty. 1. Never perform any installation procedure or open the camera case with power on.
-
Page 3: Fcc Compliance
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating or maintenance instructions that should be noted to avoid damage to the equipment or loss of data. REVO America www.revoamerica.com RELPTZ22-3... -
Page 4: Table Of Contents
Home Function ........................... 6 Auto Scan ........................... 8 Preset ............................9 Tour ............................14 Alarm ............................15 Area Title ........................... 16 Appendix A ........................... 18 Setting Camera Addresses for Large Systems ..............18 Shortcut Keys ........................... 25 REVO America www.revoamerica.com RELPTZ22-3... -
Page 5: Advanced Features
This is the ideal setup and offers the greatest flexibility and ease of operation. However, a REVO America DVR may also be used to control the camera, as well as non REVO America keyboard controllers or DVRs, which may be used providing you set the protocols correctly using the User manual. - Page 6 TOUR ALARM AREA TITLE CAMERA DOME SETUP EXIT(ESC TO EXIT) You can make selections on the menu by using the keyboard controller, DVR or non REVO device. Function Keyboard Controller Key MENU Call the on-screen menu utility Joystick up or down Navigate through the menu items.
-
Page 7: The Advanced Features On The Dome Menu
Titling Many of the features provide the ability to create titles that appear on the monitor when the camera reaches a specific position, or to label an Auto Scan, Preset, Tour, etc. Rather than REVO America www.revoamerica.com RELPTZ22-3... -
Page 8: Home Function
Home Function to one of the functions will program the camera to automatically begin one of the following: None/Tour/Auto Scan/Preset, after a user defined waiting time. REVO America www.revoamerica.com RELPTZ22-3... - Page 9 Function. You can set it for 10-240 seconds. FUNCTION ENABLE ON/OFF. Set to ON to enable the Home Function. SAVE AND EXIT To save the selection, move the joystick to the right. To exit without saving changes, press the ESC key. REVO America www.revoamerica.com RELPTZ22-3...
-
Page 10: Auto Scan
Defines the scan direction. CW: clockwise. CCW: counterclockwise. SWAP: Swaps the starting and ending points. DWELL: Sets the time that the camera stays on the start and end points before scanning. 01-99 seconds. To create an Auto Scan, proceed as follows: REVO America www.revoamerica.com RELPTZ22-3... -
Page 11: Preset
Up to 240 Presets may be programmed for this camera. In addition, Presets may be assigned to an alarm action or as the Home position for the camera. REVO America www.revoamerica.com RELPTZ22-3... - Page 12 Preset from 03-99 seconds. To create a Preset, proceed as follows: - : blank Preset position * : position has the Preset █ : current cursor position Follow the steps below to store the Preset positions: REVO America www.revoamerica.com RELPTZ22-3...
- Page 13 AUTO/MANUAL/ONE PUSH. Select which focus setting you wish to use. MOTION: OFF/ON. Select ON if you want the camera to detection motion. 6. Select MOTION SETUP to fine tune motion detection. The Motion Setup menu displays. REVO America www.revoamerica.com RELPTZ22-3...
- Page 14 (CTRL KEY) NUMBER 001 TILT 000.0 000.0 EXIT(ESC TO EXIT) 11. Hold down the CTRL key while selecting the desired scene with the joystick. The current position will be displayed. Release the CTRL key to complete. REVO America www.revoamerica.com RELPTZ22-3...
- Page 15 Example: 1 , 0 , 1 + CTRL + PRST keys will store the current view as Preset no. 101. In this case, focus will be programmed as Auto, dwell time will be set to 3 seconds, and the current AE mode will be programmed. REVO America www.revoamerica.com RELPTZ22-3...
-
Page 16: Tour
3. Choose a blank position to be programmed by moving the joystick up, down, right, or left. 4. To add a stored Preset, twist the joystick then the stored Preset number displays. Continue adding Presets as required. REVO America www.revoamerica.com RELPTZ22-3... -
Page 17: Alarm
The input Alarm has a priority of 1. FUN: Function. Stored Preset number to be called by alarm. Input. Specifies the type of input that will trigger the alarm. NO: Normally open. NC: Normally closed. OFF: Ignore input. REVO America www.revoamerica.com RELPTZ22-3... -
Page 18: Area Title
Swaps the Start and End points. To create area titles, proceed as follows: 1. Select NUMBER and set the desired number by moving the joystick to the left or right. 2. Edit the title as described in the Titling section. REVO America www.revoamerica.com RELPTZ22-3... - Page 19 4. Select END ANGLE. Hold down the CTRL key while moving the joystick to select the end position. Release the CTRL key to complete the selection of the end position. REVO America www.revoamerica.com RELPTZ22-3...
-
Page 20: Setting Camera Addresses For Large Systems
DIP switch S1is used to set the camera address. Apply the settings for each camera in your video system as shown in the following table. NOTE This is an important step. If you do not set the camera addresses correctly, there will be communication errors. S1 Settings SWITCH NUMBER CAMERA REVO America www.revoamerica.com RELPTZ22-3... - Page 21 SWITCH NUMBER CAMERA REVO America www.revoamerica.com RELPTZ22-3...
- Page 22 SWITCH NUMBER CAMERA REVO America www.revoamerica.com RELPTZ22-3...
- Page 23 SWITCH NUMBER CAMERA REVO America www.revoamerica.com RELPTZ22-3...
- Page 24 SWITCH NUMBER CAMERA REVO America www.revoamerica.com RELPTZ22-3...
- Page 25 SWITCH NUMBER CAMERA REVO America www.revoamerica.com RELPTZ22-3...
- Page 26 SWITCH NUMBER CAMERA REVO America www.revoamerica.com RELPTZ22-3...
-
Page 27: Shortcut Keys
Shortcut Keys If you are using the REVO America keyboard controller you can use a shortcut key to perform operations requiring the joystick and/or other keys. Short Cut Key Function PRST Access Preset setup menu. TOUR Access Tour setup menu. - Page 28 Flip the camera in the 180° area horizontally. 250 + PRST Factory setup menu (Tour dwell time, Answer delay) 888 + Night Shot on (in the global mode only) ENTER 999 + Night Shot off (in the global mode only) ENTER REVO America www.revoamerica.com RELPTZ22-3...
- Page 29 REVO America www.revoamerica.com RELPTZ22-3...