Lorex LNC201 User Manual page 76

harder to spot at night. It also allows you to configure the motion detection sensitivity
when using video motion detection.
To configure the camera status LED's:
1. Under Status LED Control, select one of the following:
• Normal: LED's will function as normal. For details on LED functions, see "Camera
Overview" on page 1.
• Always turn off: LED's are turned off at all times.
• Turn off after connected: LED's turn on when the camera is powered on and turn off
once a network connection is made.
2. Click Update to save changes. Enter the camera admin user name (default: admin)
and password (default: left blank) and click OK. The camera will disconnect. Wait
about 15 seconds and then double-click the camera in Camera List or Auto Search to
reconnect to the camera.
To configure motion detection sensitivity:
NOTE: The following method works when using video motion detection. It does not work
when using PIR motion detection. For details on enabling motion detection and selecting
video motion detection or PIR, see "Schedule" on page 175.
1. Under Motion Detection Sensitivity, select the motion detection sensitivity between
1 (High) and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will
be triggered if a moving object is larger than 1% of the video area. If it is set to 10, a
moving object must be larger than 10% of the video area to trigger motion detection.
2. Click Update to save changes. Enter the camera admin user name (default: admin)
and Password (default: left blank) and click OK. The camera will disconnect. Wait
about 15 seconds and then double-click the camera in Camera List or Auto Search to
reconnect to the camera.
L-View 104 for PC
61