Lorex LNC201 User Manual page 17

Camera Overview
• / Status: Glows when camera is connected to the Internet. Flashes when there is
a connection problem.
7. PIR Motion Sensor: Allows the camera to detect motion by tracking body heat.
8. Infrared LED: Allows the camera to see in the dark.
9. DC/IN: Connect the included power adapter.
10.CamID Label: Shows the camera's CamID number and a QR code for easy setup
using mobile devices.
11.NET: Connect an Ethernet cable and connect the other end to your router (not
included).
12.MicroSD Card Slot: Insert a microSD card (not included) to enable recording on the
camera. Camera supports microSD or microSDHC cards up to a maximum size of
32GB.
13.Audio Out: Connect to an external speaker (not included) using a 3.5mm headphone
jack.
14.Mounting Stand: For mounting instructions, see "Wall or Ceiling Mounting" on
page 193.
15.Reset Button: While the camera is powered on, press with a pin or small object for at
least 4 seconds to reset the camera to factory defaults. This is useful if you have
forgotten the password for the camera.
2
15
12
13
14
Bottom of camera