Lorex LNC201 User Manual page 132

Infrared LED turns on to enable night vision.
To configure Day/Night mode:
1. In Camera List, tap
2. Tap Video Settings. Then tap Night Mode Control.
3. Select one of the following:
• Auto: Camera will automatically switch between day mode or night mode, based on
the amount of light in the room.
• Schedule: Camera will switch between day mode and night mode at scheduled times
each day. If using this option, tap under Schedule time of night mode, use the sliders
to set the Start time (when night mode begins each day) and End time (when night
mode ends each day), then tap Done.
• Manual: Manually select day mode or night mode. If using this option, select Day for
day mode or Night for night mode.
4. Tap Update to save your changes.
next to the camera you would like to edit.
iPad® App
Select Day/Night mode
control type
Select Scheduled Day/
Night control
Create schedule for Day/
Night mode
117