Lorex LNC201 User Manual page 185

Configuring Camera Settings using a Web Browser
2. In L-View, right-click on the camera in Auto Search and click Web Configure.
3. Type the camera admin user name (default: admin) and password (default: left
blank) and click Ok to log into the camera.
4. Click Admin then click Upgrade.
Admin
Upgrade
5. Select Upgrade from local file.
6. Click Browse, locate the firmware upgrade file, and then click Open.
7. Click Upgrade. Wait for the firmware upgrade to complete. Do not disconnect the
power or network cable during the firmware upgrade. The camera will reboot once
firmware upgrade is complete.
170
Right-click the camera under Auto
Search and click Web Configure
Select Upgrade from
local file
Click Browse and
select firmware file
Click Upgrade