Lorex LNC201 User Manual page 150

2. Tap Video Settings. Then tap Video.
3. Configure the following:
• Video color: Select Color to view the camera in color or select Black & white.
• Brightness: Manually adjust the brightness of the image between 10 (highest) and
1 (lowest).
• Sharpness: Manually adjust the sharpness of the image between 10 (highest) and
1 (lowest).
• Low Light Sensitivity: Set the camera's sensitivity in low light environments between
Very High (highest), High, and Normal (lowest).
• Place: Select Outdoor video for well lit environments. Select Indoor Video if you
notice strip lines in the image or if the picture is too dark on the Outdoor video setting.
Select Indoor video + sunlight if the picture is too bright on the Indoor Video setting.
If you select an indoor settings, select 60Hz light freq or 50Hz light freq to adjust
the camera for the frequency of your indoor lighting.
• Favor/Preference: Select whether you would like the camera to reduce the image
quality or the frame rate when bandwidth increases or decreases. Select Video
Motion to have the camera maintain the frame rate and reduce image quality when
bandwidth is insufficient. Select Image Quality to have the camera maintain image
quality and reduce frame rate when bandwidth is insufficient. Select Better Quality
to have the camera maintain frame rate and increase quality when bandwidth is
sufficient. Select Best Quality to have the camera maintain the frame rate and
increase quality to the maximum speed of the connection.
Select Color or Black & White
Select Brightness
Select Sharpness
Select low light sensitivity
Select environment settings
Select quality preference
Enable/disable time stamps
Enable/disable video flip
Android™ App
135