Programming The Radio's Call Lists; Programming The Telephone List Numbers - Motorola MTX8250 User Manual

PROGRAMMING THE RADIO'S
CALL LISTS

Programming the Telephone List Numbers

This feature allows you to use the radio's keypad
to change the telephone numbers assigned to
any of the telephone list members. Each phone
number can have up to 16 digits.
o change the telephone list
T
/ until
1 PROG is
displayed.
l (the softkey
2
below PROG ).
3 ; (the softkey below
PHON ). The display
shows the first
programmable member
of the telephone list.
4 / or ,,
—or—
Use the keypad to enter the desired member's
position number (1 to 19) to view the other
members of the telephone list.
5 When you stop on a
member of the list, the
display will alternate
between showing the
member's name and
telephone number.
6 Press the select key to enter edit mode.
7 A short press would
enable the editing of the
telephone number. The
PROG
display shows the cur-
rent member's telephone
SCAN PHON CALL
number.
8 A long press would
enable the editing of the
FIRE DEPT
member's name. The
display shows the cur-
rent member's name.
9 Use any of the alphanumeric keys to make
the changes. The blinking cursor indicates the
position of the next number to be added. If
you require a pause in the phone dialing
sequence (to allow for a delay), you can do so
by first pressing the * key, followed by
pressing the # key. The display will show a
for pause.
Alternates between:
POLICE DEPT
and
5556213
5556213
POLICE DEPT
P
47
English