Sending A Call Alert - Motorola MTX8250 User Manual

Receiving a Call Alert Page with a Group
Call
1 When a Call Alert page is received, four alert
tones will sound (repeats every 5 seconds).
2 The green LED lights and the Call Received
annunciator, F, blinks indicating a call is
received.
3 Press the PTT button to answer the page.
4 The display shows the
current talkgroup. The
audible alert, LED, and
call received annuncia-
tor turns off.
5 The ID number of the radio that paged you is
stored as "the last ID number received."
6 Begin your conversation; all members of your
talkgroup will hear your response. Press the
PTT button to talk; release the button to listen.
Note:
44
English
FIRE DEPT
When you receive a Call Alert page,
you can enter Private Conversation
Call mode and call the paging radio
using the latest ID received.

Sending a Call Alert

There are three steps in sending a Call Alert:
1. Initiating a Call Alert
/ until
1 PAGE is
displayed.
l (the softkey below
2
3
The display shows the
last ID number
transmitted or received.
Note: The same list is shared by both Call
Alert and Private Conversation Call
features.
If your radio has been so programmed, you
can press the page button for quick access to
the Call Alert feature. This will take you directly
to step 3, above.
2. Entering the Radio ID Number that you
Wish to Page
If the last ID number called or received is the
desired number, go directly to step 5.
PAGE PHON VIEW
PAGE ).
ID: 722588