Variable Rf Power Level; Smart Ptt (Conventional Operation Only) - Motorola MTX8250 User Manual

3 The current talkaround
state appears on the
display for a few
seconds.
4 Then, the display
prompts for the new
state.
l below the desired talkaround state:
5
repeat ( RPTR ) or direct (
6 The radio returns to the
home display.

VARIABLE RF POWER LEVEL

Radios can have more than one power level.
High power can be programmed on modes
where high power is permitted, and low power
can be programmed on all other modes. The
high-/low-power feature can be selected via
the radio feature menu.
SMART PTT (CONVENTIONAL
REPEATER MODE
OPERATION ONLY)
or
This feature is programmable by your
authorized Motorola dealer.
DIRECT MODE
Smart PTT is a per-mode feature which gives
the system manager better control of radio
DIR RPTR
operators. When smart PTT is enabled in your
radio, you cannot transmit on an active mode.
Three radio-wide variations of smart PTT are
available.
DIR ).
• Transmit Inhibit on Busy Mode—you are
DIR RPTR
prevented from transmitting if any activity is
detected on the mode.
• Transmit Inhibit on Busy Mode with
Wrong Squelch Code—you are pre-
vented from transmitting on an active mode
with a squelch code other than your own. If
the PL code is the same as yours, you are
allowed to transmit.
• Quick-Key Override—This feature can
work in conjunction with either of the two
above variations. This feature allows you to
override the transmit-inhibit state by quick-
keying (two PTT button presses within a
37
English