Important Safety Instructions - Euro-Pro Ninja 1100 Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only
WHEN USING ELECTRICAL
APPLIANCES, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS
BEFORE USING YOUR NINJA
KITCHEN SYSTEM 1100™.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a
polarized plug (one blade is wider
than the other). This plug will fit
into a polarized outlet only one
way. If the plug does not fit fully
into the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician to install the proper
outlet. DO NOT modify the plug in
any way.
2 2
NJ602_series_30_IB_ENG_120427_2.indd 2
®
TOLL FREE: 1-877-646-5288
1. To protect against electrical shock,
do not submerge the appliance or
allow the power cord to come into
contact with water or any other
liquid.
2. Close supervision is necessary when
any appliance is used by or near
children.
3. Never leave an appliance
unattended when in use.
4. Turn the appliance "Off" and remove
the power cord from the electrical
outlet when not in use, before
assembling or disassembling parts
and before cleaning. To unplug,
grasp the plug and pull from the
electrical outlet. Never pull from the
power cord.
5. DO NOT abuse the power cord.
Never carry the appliance by the
power cord or yank it to disconnect
from electrical outlet; instead grasp
the plug and pull to disconnect.
6. DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions, has been
dropped or damaged in any manner.
Return the appliance to EURO-PRO
Operating LLC for examination,
repair or adjustment.
7. DO NOT let the power cord hang
over the edge of table or counter or
touch hot surfaces such as the stove.
8. Always use appliance on a dry, level
surface.
9. Keep hands, hair, clothing, as well
as utensils out of container while
processing to reduce the risk of
severe injury to persons or damage
to the appliance. A scraper may be
used but only when the appliance is
not running.
10. CAUTION: Blade assembly is sharp,
handle with care. When handling
the blade assembly, always hold by
the shaft.
11. Avoid contact with moving parts.
12-04-30 8:44 AM