Avaya B179 Installation And Administration Manual page 48

Avaya B179 SIP Conference Phone
PROVISIONING – UPGRADE AND CONFIGURATION
<require_100rel>
<use_srtp>
<srtp_secure_signaling>
<codec>
<type>
<name>
<prio>
<dtmf>
<no_vad>
<ec_tail>
<enable_ice>
<enable_relay>
<enable_presence>
<tls>
<tls_password />
<tls_method>
<tls_verify_server>
<tls_verify_client>
<tls_require_client_cert>
<tls_neg_timeout>
<account>
<valid>
44
0: no information will be added in SDP and parsing is disabled
1: only the NAT type number is added
2: add both NAT type number and name
Specify whether support for reliable provisional response (100rel and
PRACK) should be required by default. Note that this setting can be
further customized in account configuration.
Specify default value of secure media transport usage. Note that this
setting can be further customized in account configuration.
0: SRTP will be disabled, and the transport will reject RTP/SAVP offer.
1: SRTP will be advertised as optional and incoming SRTP offer will be
accepted.
2: The transport will require that RTP/SAVP media shall be used.
Specify whether SRTP requires secure signalling. This option is only used
when use_srtp option above is non-zero. Note that this setting can be
further customized in account configuration.
0: SRTP does not require secure signalling
1: SRTP requires secure transport such as TLS
2: SRTP requires secure end-to-end transport (SIPS)
Codec type
Codec name
Codec priority (0-4)
DTMF signalling. Default is 2.
0: In-band
1: SIP message
2: RTP message
Disable VAD. Default is VAD enabled.
Echo canceller tail length, in milliseconds.
Enable ICE?
Enable ICE relay?
Enable the use of presence signalling.
Password for the private key
TLS protocol method from pjsip_ssl_method, which can be:
0: Default (SSLv23)
1: TLSv1
2: SSLv2
3: SSLv3
23: SSLv23
Verify server certificate.
Verify client certificate.
Require client certificate.
TLS negotiation timeout in seconds to be applied for both outgoing and
incoming connections. If zero, no timeout is used.
If this account information is valid or not.
Installation and Administration Guide