Set The Vmd Areas [Vmd Area] - Panasonic WV-NF302 Setup Instructions

Set the VMD areas [VMD area]

Click the [VMD area] tab on the "Alarm" page. ( pages 4 and 5: How to display/operate the setup menu)
The video motion detection areas can be set on this page.
The following are descriptions of how to set areas to detect motion of objects using the VMD function.
Up to 4 areas can be set. When motion is detected in the set area, it will be regarded as an alarm.
[Area]
When selecting an area to create the first VMD area on
images, the selected area will be set as VMD area 1.
The subsequently created VMD areas will be set in
numerical order (2-4).
[Status]
Select "On" or "Off" to determine whether or not to acti-
vate each VMD area.
On: Activates the respective VMD area
Off: Inactivates the respective VMD area
Default: Off
[Detection area]
Adjust the size of the VMD area using the slider.
The smaller the selected value is, the higher the sensi-
tivity of VMD area becomes.
The current value (1-10) will be displayed on the right of
the slider.
Available value: 1-10
Default: 1
[Detection sensitivity]
Adjust the sensitivity of motion detection in the VMD
area using the slider.
The larger the selected value is, the more the sensitivity
(responsiveness) of the VMD area increases.
The adjusted value will be applied to all of the VMD
areas (1-4).
The current value (1-15) will be displayed on the right of
the slider.
Available value: 1 (low)-15 (high)
Default: 8
[Delete] button
Click the [Delete] button respective to the VMD area to
be deleted.
The outline of the VMD area will disappear.
Even after the outline of the VMD area disappeared, the
respective VMD area will not be deleted until the [Set]
button is clicked.
Notes:
• When motion is detected, the alarm occurrence indi-
cation button ( Operating instructions) will be dis-
played.
• When received a terminal alarm or a command
alarm, the alarm occurrence indication button
( operating instructions) will be displayed.
• Even when "Real time" is selected for "Alarm status
update mode" ( page 9) on the [Basic] tab page of
the "Basic" page, notification of the VMD alarm may
sometimes not be provided in real time depending
on the network environment.
• Motion of objects can be detected only when motion
range is larger than 1/192 (12 (V) x 16 (H)) of the
screen.
35