Factory Presets; Mode Factory Preset; Erasing Patterns - Minelab X-Terra 70 Quick Start & Reference Manual

FACTORY PRESETS

44
Factory Preset
Mode Specific, General and Mode
Dependent settings are all saved when
the X-Terra 70 is switched off
(pg. 12)
To return to all of the preset menu values:
Turn the detector off.
While pressing and holding
MENU SELECT
turn the detector back on, by pressing
once.
POWER
During the start-up sequence, release
.
MENU SELECT
After the start-up sequence, the Factory
Preset message (FP), will appear for three
seconds to indicate that all settings have
been returned to the preset values.
Factory Preset does not
erase Discrimination Patterns.
The Mode Factory Preset does
not erase General Settings and
Discrimination Patterns.

Erasing Patterns

Custom patterns are saved when the
X-Terra 70 is switched off. To erase custom
patterns and return to preset patterns:
Turn the detector off.
While pressing and holding
PATTERNS
turn the detector back on by pressing
once.
POWER
During the start-up sequence, release
.
PATTERNS
After the start-up sequence, the Patterns
Erased message (PE) will appear for three
seconds, indicating that the custom
patterns have been erased and returned
to the preset patterns.

Mode Factory Preset

The X-Terra 70 allows the user to reset
settings for the current detect mode only.
. Select the detect mode which
needs to be reset.
Turn the detector off.
While pressing and holding
,
turn the detector back on, by pressing
once.
POWER
During the start-up sequence,
.
release
MODE AUTO
After the start-up sequence the
Mode Factory Preset message (FP)
will appear for three seconds to indicate
that all settings have been returned to
the preset values.
Coin & Treasure Mode Factory Presets
Discrimination Pattern
Sensitivity
Volume (Speaker)
Volume (Headphones)
Noise Cancel Channel
Threshold (Speaker)
Threshold (Headphones)
Target Tones
Ground Balance
,
Prospecting Mode Factory Presets
Iron Mask
Sensitivity
Volume (Speaker)
Volume (Headphones)
Noise Cancel Channel
Threshold (Speaker)
Threshold (Headphones)
Threshold Tone
Ground Balance
MODE AUTO
1
16
25
20
0
12
12
4
(Fixed) 27
5
22
25
20
0
10
8
22
(Track)
Press
once
Press and hold
(Factory Preset)
or
Press and hold
(Mode Factory
Preset)
Press and hold Press
(Erase Patterns) once
45