Table of Contents
Advertisement
3.4 Tools required for installation
1
4
6
1. Power drill.
2. Pozidrive screwdriver.
3. 3 mm (5/32) Allen key.
4. Marine grade sealant.
5. Suitable sized drill bit.
6. Adhesive tape.
7. 18 mm (23/32") Hole saw (only required if you are routing
the cable through the transom.
Additional tools required
When surface mounting the display the following additional tools
are required.
1
1. Jigsaw.
2. 32 mm (1 1/4") hole saw.
3. 7 mm (9/32") spanner.
4. File.
18
2
3
5
7
2
3
4
3.5 Software updates
The software running on the product can be updated.
• Raymarine periodically releases software updates to improve
product performance and add new features.
• You can update the software for your product using a
connected and compatible multifunction display.
• Refer to
www.raymarine.com/software/
updates and the software update procedure for your product.
• If in doubt as to the correct procedure for updating your
product software, refer to your dealer or Raymarine technical
support.
Caution: Downloading software
updates
The software update process is carried out at your
own risk. Before initiating the update process
ensure you have backed up any important files.
Ensure that the unit has a reliable power supply
and that the update process is not interrupted.
Damage caused by incomplete updates are not
covered by Raymarine warranty.
D12785-1
By downloading the software update package, you
agree to these terms.
D12776-1
for the latest software
Dragonfly / Dragonfly 7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
