View Switcher - Raymarine Dragonfly Installation And Operation Instructions Manual

6.9 View switcher

The view switcher allows selection of pre-defined views on the
display.
Full screen and split screen application views are available.
1
1 View thumbnails
2 Active application
3

View switcher

4 View switcher titlebar
The views available are:
• Chart application
• Sonar application
• DownVision application
• DownVision / Sonar application — splitscreen
• Chart application / Sonar application — splitscreen
• Chart application / DownVision application — splitscreen
• Tools & Settings
Opening the View switcher
From the top level application state (Motion mode or Scrolling
mode):
1. Press the Back button.
Using the View switcher
To select a view follow the steps below.
With the View switcher displayed:
1. Use the Joystick or the Rotary control to highlight a view.
2. Press the OK button to display the chosen view.
Selecting the active pane in splitscreen
views
When a splitscreen view is displayed you can change the active
pane (the pane that you want to control) using the View switcher.
With a splitscreen view displayed.
1. If required press the Back button to change the Chart
application to Motion mode, or the Sonar or DownVision
applications to Scrolling mode.
2. Press the Back button again.
The View switcher is displayed.
3. Use the Joystick or Rotary control to highlight the pane
you want to be active.
4. Press the OK button to confirm.
The selected view is displayed and a border is placed around
the active pane.
42
D12634-1
Dragonfly / Dragonfly 7