Mac Address Filter - D-Link DIR-506L User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to control access to your network based on the MAC addresses of connected clients.
You can set MAC address filtering to only allow the listed MAC addresses to connect, or block access to all listed MAC addresses.
After making your changes, click the Save Settings button.
MAC Address
Control: Click Enable to allow MAC filtering.
Connection
When this option is selected, only PCs and devices with
Control: MAC addresses listed below with the 'C' option checked
can connect to the router. The drop-down menu will allow
you to choose whether all other MAC addresses that are
not in the list will be blocked or allowed to connect.
Association
When this option is selected, only PCs and devices with
Control: MAC addresses listed below with the 'A' option checked
can associate themselves with the wireless LAN. The drop-
down menu will allow you to choose whether all other
MAC addresses that are not in the list will be blocked or
allowed to associate.
MAC Address: Enter the MAC addresses you would like to filter and
then select whether you want them group with the 'C'
(Connection Control) group, the 'A' (Association Control)
group, or both. If the control groups are not enabled,
these designations will be ignored.
D-Link DIR-506L User Manual

MAC Address Filter

47