Initial Setup Wizard - D-Link DIR-506L User Manual

Section 2 - Installation
This wizard is designed to guide you through a step-by-step
process to configure your new D-Link router and connect to the
Internet.
Click Next to continue.
If you chose Router mode, the DIR-506L will try to detect what
type of Internet connection you have and will ask you for the
related settings. Enter the settings for your connection and
click Next.
If your Internet connection cannot be detected(or if you click
the Prev button after the previous step), you will need to
select which type of Internet connection you have. Select your
Internet connection type, then click the Next button and enter
the related settings.
Note: Most cable modem connections use DHCP, and most
DSL modem connections use PPPoE. If you are not sure which
connection type you use or what settings to enter, contact your
Internet service provider.
D-Link DIR-506L User Manual

Initial Setup Wizard

11