Guest Zone - D-Link DIR-506L User Manual

Section 3 - Configuration
The Guest Zone feature allows you to create a separate wireless network for guests to access the Internet without allowing
them to connect to your own devices. After making your changes, click the Save Settings button.
Enable Guest Tick this checkbox to enable the Guest Zone feature.
Zone:
Add New Select when the Guest Zone will be active. The schedule
Schedule: may be set to Always, which will allow the Guest Zone to
be on at all times. You can select a schedule you created,
or you can click the Add New Schedule button to create
a schedule.
Wireless
Network Name:
Enter a wireless network name (SSID) for your guest zone.
It should be different than the network name of your main
Enable Routing
wireless network.
Between Zones:
Check to allow network connectivity between the Guest
Security Mode: Zone and your main network.
Here, you can select between None, WEP, WPA-Personal,
and WPA-Enterprise. Refer to "Wireless Settings" on
page 33 for information on how to configure the different
security modes.
D-Link DIR-506L User Manual

Guest Zone

53