D-Link DIR-506L User Manual page 26

Section 3 - Configuration
Select which type of Internet connection you have. Select your
Internet connection type, then click the Next button and enter
the related settings.
Note: Most cable modem connections use DHCP, and most
DSL modem connections use PPPoE. If you are not sure which
connection type you use or what settings to enter, contact your
Internet service provider.
If you selected DHCP Connection, you will see the following
screen. If your ISP requires you to enter a MAC address and Host
Name, fill them in here. You can click the Clone MAC button to
enter your current computer's MAC address.
Click Next to continue.
Setup is complete, and your wireless network name and
password will be displayed. It is recommended that you write this
information down for future reference. Click Save to save your
settings and reboot the router.
D-Link DIR-506L User Manual 22