Light Bulb Replacement - Fisher & Paykel HP60IDCHX2 Installation Instructions And User Manual

Using your rangehood
10
Filter maintenance
To maintain efficiency, the filters should be removed regularly (approximately monthly), and
washed using hot soapy water or the dishwasher.
Note: some discolouration of the frame may occur if washed in the dishwasher.
Rangehoods fitted with charcoal filters are designed to remove grease and odours from cooking
vapours prior to the cleansed air re-entering the kitchen (when the rangehood is in recirculation
mode). Charcoal filters should be replaced every two to four months depending on use.
Note: fully saturated charcoal filters can become a barrier to air movement therefore limiting
rangehood performance. In the event of fire, grease laden filters could be flammable and
therefore regular replacement is recommended. In ducted installations, conventional aluminium
filters are recommended.

Light bulb replacement

To replace a bulb, first disconnect the rangehood from the power supply. Remove the lamp cover
HPxxID models only. Care must be taken to avoid the lamp lens falling on to the hob top. The
bulb, max 50W, is a screw fit into the lamp socket. Insert the replacement bulb into the lamp
socket and replace the lamp cover.
Note: replacement bulbs are not covered by warranty.
HP60/90IC HP60/90ID
Fig.7 Bulb replacement