PRODUCT AND CABINETRY CUT-OUT DIMENSIONS HPB6028-1, HPB7528-1, HPB7548-1, HPB9028-1, HPB9048-1, HPB9048-2 and HPB12048-2 models 38mm Refer to page 4 for details on ‘Cabinet mounting installation’...
Page 5
PRODUCT AND CABINETRY CUT-OUT DIMENSIONS HPB6028-1 HPB7528-1 HPB7548-1 HPB9028-1 HPB9048-1 HPB9048-2 HPB12048-2 PRODUCT DIMENSIONS Overall height of product Overall height of product (excluding duct adaptor) Overall width of product 1180 Overall depth of product Thickness of flange Corner radius of flange...
INSTALLATION PREPARATION IMPORTANT Rangehood height Rangehood width INSTALLATION DIMENSIONS Top of cooking surface to base of Minimum 600 The smaller rangehood models are only intended to be installed over a cooktop with a ● ● the rangehood Maximum recommended 1067 maximum of four burners or cooking zones.
Page 7
INSTALLATION PREPARATION Venting requirements Electrical requirements IMPORTANT! WARNING! To reduce risk of fire and to properly exhaust air, be sure to duct air outside — Do not vent Electrical wiring must be done by qualified person(s) in accordance with all applicable ● ●...
INSTALLATION INSTRUCTIONS IMPORTANT! Ensure the cabinetry has the required cutout for insertion of the rangehood. Refer to the Venting directly into the cabinet with no vent is not permitted. ‘Cabinetry cutout dimensions’ section of this installation book. If you are using a duct adaptor this must be installed to the rangehood prior to the WARNING! rangehood being mounted.
Page 9
INSTALLATION INSTRUCTIONS Note: The rangehood must be installed with the control panel on the right.