Dell Inspiron 2500 Factory Service Manual page 95

Removing and Replacing Parts : Dell Inspiron 2500 Systems
NOTICE: When reconnecting the flex cable, press down on both ends of the connector, not in the middle.
Pressing the middle of the connector can damage fragile components.
3. Remove the display assembly
4. Remove the 4-mm screw securing the plastic flex-cable mounting bracket to the top cover assembly.
5. Remove the six 3-mm screws (three on each side) from the right and left sides of the panel.
6. Lift the display panel and flex cable out of the top cover assembly.
HINT: If you find a kaption tape on the standard connector, remove
it.
7. Disconnect the flex cable from the two connectors (a ZIF and a standard connector) on the display panel
assembly.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...hecked%20ok/Inspiron/2500/2500%20SM/remove.htm (26 of 46)6/21/2004 12:45:37 AM
bezel.