Windows® Error Messages - Dell Inspiron 2500 Factory Service Manual

Solving Problems : Dell Inspiron 2500 Systems
Check the network cable connector—
connector is firmly connected to the connector on the computer and the
network wall jack.
Check the network lights on the network connector—
the network connection is active. If the status light is not green, try replacing
the network cable. Amber indicates that the network card driver is loaded and
the card is detecting activity.
Restart the computer—
Contact your network administrator—
correct and that the network is functioning.
Windows® Error Messages
x:\ is not accessible. The device is not ready—
and try again.
A filename cannot contain any of the following characters: \ / : * ? " <
> |— Do not use these characters in filenames.
Not enough memory or resources. Close some programs and try again—
You have too many programs open. Close all windows and open the program
that you want to use.
The file being copied is too large for the destination drive—
you are trying to copy is too large to fit on the disk, or the disk is too full. Try
copying the file to a different disk or use a larger capacity disk.
A required .DLL file was not found—
open is missing an essential file. To remove and then reinstall the program:
Windows Me:
1. Click the Start button, point to Settings, and then click Control Panel.
2. Double-click the Add/Remove Programs icon.
3. Select the program that you want to remove.
4. Click Add/Remove and follow the prompts on the screen.
5. See the program documentation for installation instructions.
Windows 2000:
1. Click the Start button, point to Settings, and then double-click Control
Panel.
2. Double-click the Add/Remove Programs icon.
3. Select the program that you want to remove.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ecked%20ok/Inspiron/2500/2500%20SM/solving.htm (11 of 15)6/21/2004 12:45:27 AM
Ensure that the network cable
Try to log on to the network again.
Verify that your network settings are
The program that you are trying to
Green indicates that
Insert a disk into the drive
The file that