Replacing Memory Modules; Mini Pci Card Assembly - Dell Inspiron 2500 Factory Service Manual

Removing and Replacing Parts : Dell Inspiron 2500 Systems
1. Remove the memory module
2. To release a memory module from its connector, spread apart the tabs at each side of the module until the
module pops up slightly.
3. Lift the memory module out of its connector.

Replacing Memory Modules

HINT: Memory modules are keyed, or designed to fit into their connectors, in only one
direction.
1. If you only have one memory module, install it in the connector labeled "DIMM A." If you have two memory
modules, install the second module in the connector labeled "DIMM B."
2. Insert the memory module's edge connector with the slot at a 45- degree angle, and press the memory
module firmly into the slot.
3. Pivot the memory module down until it clicks into place. If you do not hear a click, remove the module and
reinstall it.
4. Insert the metal tabs on the memory module cover into the bottom case assembly. Rotate the cover down
and replace the screw.

Mini PCI Card Assembly

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...hecked%20ok/Inspiron/2500/2500%20SM/remove.htm (10 of 46)6/21/2004 12:45:37 AM
cover.