Kyocera ECOSYS P2135dn Operation Manual page 136

>Override A4/LT
? Off
>Emulation
? PCL 6
7-30
4
Press  or  to display the desired binding mode. The message
display toggles through the following:
Off (default)
Short edge bind
Long edge bind
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
Override A4/LT (Overriding difference between A4
and Letter)
When the Override A4/LT is turned On using the operation panel, the
printer ignores the difference between A4 and Letter paper sizes.
Printing is performed without an error message even if the actual paper
size in the current cassette differs from the paper size formatting the job.
By default, this feature is Off.
1
Press  while Print Settings > is displayed.
2
Press  or  repeatedly until >Override A4/LT appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using  or .
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
Emulation (Setting the emulation)
You can change the emulation mode for the current interface. Use the
procedure below to select the mode.
1
Press  while Print Settings > is displayed.
2
Press  or  repeatedly until >Emulation > appears on the
message display. One of the emulation modes appears, indicating
the emulation currently in use.
3
Press [OK]. A blinking question mark (?) appears.
4
Press  or  repeatedly until the desired emulation mode is
displayed.
PCL 6
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
EPSON LQ-850
Note The default setting for North America is KPDL (AUTO)
emulation. The default setting for all other regions is PCL 6
emulation.
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
Using the Operation Panel