Sensitivity; Reset; Reset To Factory Defaults; System Information - Chauvet Intimidator Wash Zoom 350 IRC User Manual

Sensitivity

Reset

Reset to Factory
Defaults
System
Information
Intimidator™ Wash Zoom 350 IRC User Manual Rev. 1
The sensitivity setting adjusts the sensitivity of the product's microphone. If the product is
not responding to the beat of the music in Sound mode, set the sensitivity to a higher
number until the product responds.
To adjust the sensitivity setting, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> or <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> or <DOWN> to highlight the Sensitivity option.
5. Press <ENTER>. The number to the right will show in green.
6. Use <UP> or <DOWN> to select a sensitivity level. The least sensitive is 1 and the most
sensitive is 100.
7. Press <ENTER> to select the setting.
Resetting will restart the product. It does not change any settings. Resetting is a helpful
troubleshooting tool, and can be used if the product has stopped responding to control, or if
the control system has suffered a failure.
To reset the product, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> or <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> or <DOWN> to highlight the Reset option.
5. Press <ENTER>. The product will immediately reset.
Resetting to factory defaults will clear out all customized settings and return thee settings to
the factory defaults. Resetting to factory defaults can be used if the product is behaving
inconsistently.
To reset the product to factory default settings, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> or <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> or <DOWN> to highlight the Factory Set option.
5. Press <ENTER>. The product will immediately reset to factory default settings.
To see the product's current software version, running mode, DMX address and
temperature, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> or <DOWN> to highlight the Sys Info icon.
3. Press <ENTER>. The current information about the product will show on the display.
Page 27 of 31