Impex Marcy Diamond Elite MD-PWR-20 Owner's Manual
  1. Manuals
  2. Brands
  3. Impex Manuals
  4. Home Gym
  5. Marcy Diamond Elite MD-PWR-20
  6. Owner's manual
Impex Marcy Diamond Elite MD-PWR-20 Owner's Manual

Impex Marcy Diamond Elite MD-PWR-20 Owner's Manual

Olympic cage power-20
Hide thumbs
Table of Contents

Advertisement

Quick Links

NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Identifier
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
MD-PWR-20
Retain This
Manual for
Reference
08-19-08
OWNER'S
MANUAL
MARCY DIAMOND ELITE
OLYMPIC CAGE
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
POWER-20
®
IMPEX
INC.

Advertisement

Table of Contents
loading

Related Manuals for Impex Marcy Diamond Elite MD-PWR-20

Summary of Contents for Impex Marcy Diamond Elite MD-PWR-20

  • Page 1 Parts List Warranty Ordering Parts Model MD-PWR-20 Retain This Manual for Reference 08-19-08 OWNER'S MANUAL MARCY DIAMOND ELITE OLYMPIC CAGE POWER-20 IMPEX 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746 Tel: (800) 999-8899 Fax: (626) 961-9966 www.impex-fitness.com info@impex-fitness.com ® INC.

  • Page 2: Table Of Contents

    BEFORE YOU BEGIN Thank you for selecting the MARCY DIAMOND ELITE PWR-20 Olympic ® Cage by IMPEX INC. carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, we guarantee you complete satisfaction through direct assistance from our factory.

  • Page 3: Important Safety Notices

    OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS.

  • Page 4: Warning Label Replacement

    WARNING LABEL REPLACEMENT The warning labels shown here have been placed on the Rear Stabilizer, and Upper Frame. If the labels are missing or illegible, please call customer service at 1-800-888-8899 for replacements. Apply the labels in the location shown.

  • Page 5: Hardware Pack

    HARDWARE PACK...
  • Page 6 HARDWARE PACK...

  • Page 7: Assembly Instructions

    ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Note: Do not tighten the Nuts and Bolts until instructed to do so. B.) Attach an Upright Beam (#3) onto a Floor Stabilizer (#1).
  • Page 8 STEP 2 (See Diagram 2) A.) Attach the Front Vertical Frame (#8) to the bracket on Rear Stabilizer (#7). Secure it with two M10 x 5/8” Allen Bolts (#80) and two Ø ¾” Washers (#84). B.) Attach Cross Brace (#2) to the Left & Right Support (#4 & #5). Secure each of the Cross Brace with two M10 x 3 1/8”...
  • Page 9 STEP 3 (See Diagram 3) A.) Slide the Sliding Weight Post (#10) onto the Rear Vertical Frame (#6) from top. Make sure the triangular cable connecting bracket faces up. B.) Insert the open bracket on the Upper Frame (#9) into top of the Front Vertical Frame (#8). Secure them with two M10 x 5/8”...
  • Page 10 A.) Attach the 100” Upper Cable (#42) to the opening on the front of Upper Frame (#9). Attach a Pulley (#57) to the opening. Secure it with one M10 x 2 ½” Allen Bolt (#75), two Ø 1” x 5/8” Pulley Bushings (#62), and one M10 Aircraft Nut (#86). Note: The ball stopper of the Cable must be underneath the Frame.
  • Page 11 DIAGRAM 4...
  • Page 12 A.) Do not tighten the Nuts and Bolts until instructed to do so. B.) Attach the Main Seat Support (#18) onto the Front Post (#22). Attach the Seat Bracket (#24) onto the Main Seat Support. Align the holes. Secure the Seat Bracket, Main Seat Support, and Front Post together with two M10 x 2 ¾”Carriage Bolts (#70), two Ø...
  • Page 13 STEP 6 (See Diagram 6) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Align the bracket on the Backrest Adjustment Support (#32) in between the two Backrest Supports (#35). Secure it with four M8 x 1 5/8” Allen Bolts (#81), eight Ø 5/8” Washers (#85), and four M8 Aircraft Nuts (#87).
  • Page 14 A.) Attach the Leg Developer (#25) to the open bracket on the Main Seat Support (#18). Secure it with one M10 x 3 ½” Allen Bolt (#73), two Ø ¾” Washers (#84), and one M10 Aircraft Nut (#86). Note: Do not over tighten the Nut and Bolt. Make sure the Leg Developer is able to move smoothly.
  • Page 15 STEP 8 (See Diagram 8) A.) Attach the Arm Curl Pad (#31) to the Arm Curl Stand (#28). Secure it with two M8 x 5/8” Allen Bolts (#82) and two Ø 5/8” Washers (#85). B.) Insert the Arm Curl Stand into the opening on the Main Seat Support (#18). Use the Lock Knob (#63) to lock the Stand at desired height.

  • Page 16: Exploded Diagram

    RACK EXPLODED DIAGRAM...

  • Page 18: Parts List

    PARTS LIST KEY NO. DESCRIPTION Floor Stabilizer Cross Brace Upright Beam Left Support Right Support Rear Vertical Frame Rear Stabilizer Front Vertical Frame Upper Frame Sliding Weight Post Left Safety Catch Right Safety Catch Left Bar Catch Right Bar Catch Lat Bar Shiver Bar Rotate Connector...

  • Page 19: Warranty

    IMPEX. IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures.

Table of Contents