GE Profile PTDS650EM Technical Service Manual page 9

About the control settings.
D
Estimated Time Remaining Display
• Displays the approximate time remaining until the end of the cycle.
• If the estimated time remaining is 60 minutes or more, "1H" will flash in the display, followed by the additional
remaining minutes. When the time remaining is less than 60 minutes, the timer will count down.
Message Displayed
E
Drying Cycles—
Sensor cycles automatically determine fabric dryness. Timed cycles run for the selected time.
COTTONS For cottons and most linens.
EASY CARE For wrinkle-free, permanent press and delicate items, and knits.
DELICATES For delicate items, special-care fabrics and knits.
MIXED LOAD For loads consisting of cottons and poly-blends.
TIMED DRY Set the Cycle Selector at the desired drying time.
DAMP DRY For leaving items partially damp.
DEWRINKLE For removing wrinkles from items that are clean and dry or that are very lightly damp.
QUICK FLUFF For freshening or fluffing up already dry clothing, fabric, linens and pillows. Use with NO HEAT.
Provides 10 minutes of no-heat tumbling.
DRYEL Designed for use with DRYEL
for directions. For questions or issues related to the use and performance of DRYEL, call
1.800.214.8913, or visit the DRYEL Website at www.dryel.com.
ANTI-BACTERIAL
NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers
KNITS For knits with fabric care labels that say "Machine Dry".
TOWELS For most towels and linens.
"dry-clean only" fabric care system. See product package
®
This option reduces certain types of bacteria by 99.9%, including: Staphylococcus aureus,
Pseudomonas aeruginosa and Klebsiella pneumoniae*. The anti-bacterial process occurs
when high heat is used during a portion of the drying cycle.
NOTE: Do not use this cycle on delicate fabrics.
*The Anti-Bacterial Cycle is Certified by NSF International (formerly National Sanitation
Foundation) to NSF Protocol P154 Sanitization Performance of Residential Clothes Dryers.
– 9 –
Description
The message "PAUSE" will scroll across the display
when the dryer's cycle is paused. The cycle may be
restarted by pressing the START button.
The message "door" will be displayed when the door
is opened during the dryer's cycle.
The message "HEAt" will be displayed when the start
button is pressed for a steam refresh or de-wrinkle
cycle. Turn the temperature knob to "High" and press
the start button.
(Continued Next Page)