GE Profile PTDS650EM Technical Service Manual page 27

4. Rotate the valve cover towards the front of the
cabinet until the inlet hose clears the back of
the cabinet. Then lift the assembly to clear the
bottom locking tab to release.
Note: In the following steps, capture any residual
water that may escape from the valve, fi ll hose, and
tubing.
5. Once the assembly is free, disconnect the water
inlet hose.
Water Inlet Hose
6. Disconnect the coil wiring.
7. Press the John Guest connector collar and
remove the water outlet tubing.
Disconnect
8. Slide the water inlet valve out from the slot.
– 27 –
John Guest
Connector
Collar
Water Outlet Tubing