Impex Iron Grip Strength IGS-705 Owner's Manual page 9

STEP 4 (See Diagram 4)
A.) Attach the Sliding Block (#7) to the Main Seat Support (#3). Secure it with one M10
x 4" Hex Bolt (#30), one Ø ¾" Washer (#35), and one M10 Aircraft Nut (#33).
B.) Attach the pivot on the Backrest Support (#9) to the bracket on Main Seat Support.
Secure it with one M10 x 3" Hex Bolt (#31), one Ø ¾" Washer (#35), and one M10
Aircraft Nut (#33).
C.) Insert the Incline Adjustment Frame through the Sliding Block. Use the T-shaped
Lock Pin (#23) to hold the Frame at the selected Incline.
D.) Attach the Incline Adjustment Frame to the Backrest Support. Secure them together
with one M10 x 4" Hex Bolt (#30), Ø ¾" Washer (#35), and one M10 Aircraft Nut
(#33).
8
DIAGRAM 4