Yamaha RX-V767 Owner's Manual page 98

MAIN ZONE 2
CODE SET o
RECEIVER
SOURCE p
2 Select the operation mode (SOURCE,
HDMI
RECEIVER or TV mode) for which functions
1 2 3 4
AUDIO
will be assigned to remote control keys.
5 V-AUX 1 2
AV
d
• Selecting the SOURCE mode
1 2 3 4
d
Press Input selector
5 6 MULTI DOCK
HDMI OUT In this mode, remote control functions for the selected
TUNER PHONO
input source can be assigned to this unit's remote control.
FM AM
• RECEIVER mode
PRESET TUNING
INFO MEMORY
p
SOURCE/RECEIVER
Press
ENHANCER SUR. DECODE
mode.
MOVIE MUSIC
SLEEP PARTY STRAIGHT PURE DIRECT
In this mode, remote control functions for external
SCENE
amplifier can be assigned to this unit's remote control.
BD
TV CD RADIO
DVD
OPTION
ON SCREEN
NOTE
When remote control functions are assigned for this
ENTER VOLUME
mode, it may be impossible to operate this unit using
RETURN
DISPLAY
the remote control.
TOP
POP-UP
MUTE
MENU MENU
REC • TV mode
n A
Press to enter TV mode.
In this mode, remote control functions for a TV can be
1 2 3 4
m
assigned to this unit's remote control.
5 6 7 8
9 0 10 ENT
Remote control functions can be assigned to this unit's
n
INPUT
remote control keys as follows.
MUTE
Mode
SOURCE
d
Input selector
m
Numeric keys
RECEIVER
n
A
o
CODE SET
p
SOURCE/RECEIVER
TV
3 Enter "9990" using
4
to enter SOURCE mode.
to enter RECEIVER
5
Keys
c k
A, Cursor B / C / D /
SOURCE
k l
E,
ENTER, External
component operation keys If 10 seconds pass after this unit enters the wait state,
a timeout error occurs and
k k
Cursor B / C / D / E,
ENTER,
k l turns off. If this occurs, repeat from step 5.
RETURN, External component
m
operation keys, Numeric keys
n
TV control keys
mNumeric
keys.
Place the remote control about 5 to 10 cm
apart from the remote control of the
external component on a flat surface so that
their infrared transmitters are aimed at each
other.
Remote control of external
component
5 to 10 cm
Press a key to which you want to assign the
function.
p
SOURCE/RECEIVER
lights up and this unit
enters a wait state to receive remote control signals. Do
step 6 within 10 seconds.
lights up
MAIN ZONE 2
CODE SET
SOURCE RECEIVER
HDMI
1 2 3 4
pSOURCE/RECEIVER
SETUP
Controlling other components with the remote control
6 Press the key on the remote control of the
external component.
Once the function of the selected key is assigned to the
key selected in step 5 successfully,
p
SOURCE/RECEIVER will blink twice.
Assignment successful: blinks twice
Assignment failed: blinks 6 times
MAIN ZONE 2
CODE SET
SOURCE RECEIVER
HDMI
1 2 3 4
• If the assignment fails, repeat from step 5.
• To continue assigning other functions, repeat steps 5
through 6.
oCODE SET
Press using a pointed object
7
such as the tip of a ballpoint pen to end the
programming.
blinks once
MAIN ZONE 2
CODE SET
RECEIVER
SOURCE
HDMI
1 2 3 4
98
En