CBA750B | USER MANUAL Firmware version 5.0
CRADLEPOINT
IPv6 Settings:
IPv6 must be enabled through the WAN initially: go to
Internet → Connection Manager to enable IPv6.
IPv6 Address Source: By default, this is set to
Delegated, which means the IPv6 address range for
the LAN is passed through from the WAN side. Change
this to Static to input your own IPv6 address range
here, or select None to explicitly disable IPv6 LAN
connectivity.
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 77