Table of Contents
Advertisement
CBA750B | USER MANUAL Firmware version 5.0
CRADLEPOINT
SNMPv3: SNMP version 3 includes all prior features with security available. SNMPv3 is the most secure setting for
SNMP. If you wish to configure traps then you must use SNMP version 3.
Get community string: The "Get community string" is used to read SNMP information from the router. This string is like a
password that is transmitted in regular text with no protection.
Set community string: The "Set community string" is used when writing SNMP settings to the router. This string is like a
password. It is a good idea to make it different than the "Get community string."
SNMPv3
8.5.1
If you select SNMPv3, you have several
additional configuration options for added
security.
Authentication type: Select the
authentication and encryption type that will
be used when connecting to the router from
the following dropdown list. These settings
must match the configuration used on any
SNMP clients.
• MD5 with no encryption
• SHA with no encryption
• MD5 with DES encryption
• SHA with DES encryption
• MD5 with AES encryption
• SHA with AES encryption
Username: Enter the Username configured on your SNMP host in the username field.
Password: Enter the Password for your SNMP host in the password and verify password fields. This password must be
at least 8 characters long.
Enable SNMP traps: Enabling traps will allow you to configure a destination server, community, and port for trap
notifications. Trap notifications are returned to the server with SNMPv1.
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 148
Advertisement
Table of Contents
