External Mp3 Player Connection - Jacuzzi J - 315 Owner's Manual

J-300 Series
17.2

external mp3 player Connection

Connecting an external mp3 player (purchased separately)
Any battery powered MP3 player can be connected to your new spa
stereo system to enhance and personalize your spa experience!
Connection procedure
1. Connect MP3 Player to the
auxiliary port located inside
stereo enclosure using the
supplied Mini RCA cable as
shown.
2. Plug opposite end of cable
into external MP3 player
headphone jack, then sit
MP3 player on ridge above
stereo receiver as shown
enabling MP3 Playback
1. Select preferred song/album/artist play list on external MP3 player,
then start music playback.
2. Press button on stereo receiver or Mode on the remote control
SOURCE
until display reads "AUX" as shown.
Controlling external MP3 Playback
All MP3 playback operations are performed via the external MP3 players
function buttons. The spa stereo deck and/or remote control provide no
control functions of any kind with the exception of "Volume" control and
"Source" selection.
MP3 Playback recommendations
For optimum playback convenience, we recommend setting your external
MP3 player in the "continuous" playback mode (when available) for
uninterrupted music playback.
warnInG: rIsk oF eleCTrICal sHoCk HaZarD eX-
IsTs!
Never connect, disconnect or operate external MP3 player
while hands are wet or while sitting or standing partially or fully
immersed in water!
54 54