Table of Contents
Advertisement
1.6 Optional Water Temperature Sensors
12
Transom mount water temperature sensor T-02MTB
• Fix the cable at a convenient location with cable clamp.
• When the cable is led in through the transom board, make a
hole of approx. 17 mm diameter to pass the connector. After
passing the cable, fill the hole with a sealing compound.
D
D>50 cm
M5 x 20
Figure 1-16 How to install transom mount water temperature
sensor T-02MTB
Mount sensor
flush with hull bottom.
Hide quick links:
Advertisement
Table of Contents
