Impex COMPETITOR WM-343 Owner's Manual page 8

STEP 4 (SEE DIAGRAM 4)
A.) Attach the hole-side of the Backrest Supports (#28) onto both ends of the
Pivot on the Main Seat Support (#32). The other side rest against the Backrest
Adjustment Bar (#10).
B.) Place the Backrest Board (#33) onto the Backrest Support (#28). Fasten it with
four M6 x 1 3/8" Bolts (#31) and
C.) Place Seat Cushion (#34) onto the bracket on the Main Seat Support (#32).
Align the holes and fasten the Seat with four M6 x 1 3/8" Bolts (#31) and
(#30).
D.) Insert the Arm Curl Stand (#44) into the opening on the top of the Front Stabilizer
(#49). Secure with a Knob Bolt (#41).
E.) Attach the Arm Curl Pad (#35) to the Arm Curl Stand (#44). Secure it with two
M8 x 5/8" Bolts (#27) and
½" Washers (#30).
¾" Washers (#37).
7
DIAGRAM 4
½" Washers