Impex Competitor WM-205 Owner's Manual page 9

STEP 4 (See Diagram 4)
A.) Attach the Backrest Supports (#14) onto both ends of the Pivot on the Main Seat Support
(#3). Place the other end rest against the Backrest Adjustment Bar (#8).
B.) Place the Backrest Board (#17) onto the Backrest Supports. Secure it with four M6 x 1 ½"
Hex Bolts (#43) and
C.) Place the Seat Pad (#18) onto the bracket on the Main Seat Support (#3). Align the holes
and secure it with four M6 x 1 ¼" Hex Bolts (#15) and
D.) Thread the Lock Knob (#37) into the Front Stabilizer (#5).
7
½" Washers (#46).
½" Washers (46).
DIAGRAM 4