Assembly Instructions - Impex COMPETITOR CB-359 Owner's Manual

ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches
NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the Left Upright Beam (#1) and Right Upright Beam (#2) by a Cross Brace
(#3) in the mid-span. Align the holes and secure each end of the Cross Brace with one
4 ¾" x 2" Bracket (#16), two M10 x 3 ½" Carriage Bolts (#33), two
(#43), and two M10 Aircraft Nuts (#47).
B.) Place the Backrest Adjustment Bar (#5) in between the two Upright Beams on the
selected bar holder to obtain desired incline of Backrest Board.
C.) Insert two Crutches (#7) into the top openings on the Upright Beams. Push down the
Plastic Sleeve (#31) until it locks in place. Secure the Crutches with two Lock Knobs
(#30) through selected holes to obtain desired height of the Supports.
4
¾" Washers
DIAGRAM 1