Hyundai FD-01 Instruction Manual page 8

Bluetooth
2.2.2. Setting Your Bluetooth Device to Pairing Mode
1) Select the SETTINGS or CONNECTIVITY menu of your Bluetooth phone or music
player and find the menu dealing with Bluetooth connection.
2) Select the function on the device to begin searching for Bluetooth devices.
3) After the search is complete, HYUNDAI should appear on the screen of the device.
4) Select CONNECT or SELECT device HYUNDAI.
5) The mobile phone or music player should now prompt you top enter a PIN code.
Enter 0000 into your Bluetooth device.
6) The mobile phone or music player should confirm that it has established a new paired
connection with the HYUNDAI Bluetooth radio.
7) The pairing process is now complete.
8) If pairing is not successful, FAIL appears on the HYUNDAI Bluetooth radio display.
Notes When Pairing Your Bluetooth Device:
a. As each mobile phone or music player brand and model has a different menu
structure and process for adding a Bluetooth audio accessory such as the HYUNDAI
Bluetooth radio, you should refer to the user manual of your Bluetooth device for the
accurate and correct procedure.
b. A device must first be paired to the HYUNDAI Bluetooth radio before it can be
connected, i.e. if a device has been paired, it must then be connected before the
hands free and/or audio playback features can be used.
c. Once the Bluetooth pairing is complete, the HYUNDAI Bluetooth radio will attempt to
connect to your device. Some devices will require further operation to then connect
to the car radio. It is recommended that the device is set to 'Automatically Connect'
to the HYUNDAI Bluetooth radio so that whenever the car ignition switch is switched
on, the device will automatically connect to the HYUNDAI Bluetooth radio.
d. The HYUNDAI Bluetooth radio will give connection priority to the last connected
mobile phone.
e. It is recommended that all other Bluetooth devices other than that device to be paired
are switched off during the pairing process.
f. The 0000 passcode may not be required to be required on Bluetooth devices during
the pairing process.
g. The 0000 passcode is fixed in the HYUNDAI Bluetooth radio and cannot be changed
by the user.
2.2.3. Disconnecting a Bluetooth Device
If disconnection of the Bluetooth mobile phone or music player with the HYUNDAI
Bluetooth radio is required, follow the steps below.
1) Press button
2) Turn knob
3) Press knob
4) Press knob
player from the HYUNDAI Bluetooth radio.
5) When the Bluetooth connection is lost, the Bluetooth logo disappears from the display
and the previously connected device name (e.g. Samsung or Nokia) and LOST
appear on the display.
6) If BEEP ON is selected (see page 18), three beep sounds are heard when the current
Bluetooth device connection is lost or disconnected.
8
– Connection
2)
to select BLUETOOTH mode.
C
to select Device Manager.
C
to select Register Phone.
C
again to disconnect the currently connected mobile phone or music